Should is an interesting word, and in this context doesn't mean much, until you expand the context of the query.
If the jeweler is proving that the diamond is not on the list of stolen diamonds -- those listed with serial numbers, then, yes: the jeweler should show you the serial number on a diamond.
If the jeweler wants to prove that a serial number exists on a diamond -- it cannot be seen with the naked eye -- then, yes: the jeweler should show you the serial number on a diamond.
Otherwise, the situation requires a context.
You might not want to remove a serial number from a diamond. It strictly identifies the stone and its ownership can be traced. If the stone is stolen or acquired by other illegal means and want to camouflage it so that it cannot be identified by its serial number, you may be able to find a dodgy jeweler who is willing to recut the stone, which lessens its value, but will remove the serial number.
If the diamond has a serial number -- not all diamonds do -- you are most likely to find it engraved on the girdle of the stone.
Some diamond producers engrave stones so as to make each stone more uniquely identifiable. The engraving should have documentation with it that details who engraved it and where the engraved data is stored.
This firearm has benn overhauled at the Winchester factory and a different receiver installed. James Friend
Contact your local police. If it was reported stolen, it should be in the system.
You might not want to remove a serial number from a diamond. It strictly identifies the stone and its ownership can be traced. If the stone is stolen or acquired by other illegal means and want to camouflage it so that it cannot be identified by its serial number, you may be able to find a dodgy jeweler who is willing to recut the stone, which lessens its value, but will remove the serial number.
If the diamond has a serial number -- not all diamonds do -- you are most likely to find it engraved on the girdle of the stone.
Diamond Arms single gauge serial number 49885 what gauge is it and when was it made plus value if in fair condition?" Diamond Arms single gauge serial number 49885 what gauge is it and when was it made plus value if in fair condition?" "Diamond Arms single gauge serial number 49885 what gauge is it and when was it made plus value if in fair condition?"
Under the lever.
remove barrel and serial # will be stamped on top of receiver on left
Some diamond producers engrave stones so as to make each stone more uniquely identifiable. The engraving should have documentation with it that details who engraved it and where the engraved data is stored.
There is no way to tell the gauge from the serial number, and that may not even be a true serial number. Diamond Arms were made by several manufacturers for distribution by the Shapleigh Hardware Company of St Louis between the 1880s and 1940s. Anyone familiar with shotguns should be able to determine the gauge by looking at the gun, but to find the proper ammunition you should also have a gunsmith measure the length of the chamber.
If it is a newer edition it will have a serial number. 2011 and prior do not have the serial numbers.
Both should date to 1954.
With a 93xxxx serial number is should be a 2007 build.
You did not list the serial number. The serial number should follow this example - CCB8765
69-70