On a ruler, .30 inches is slightly less than one-third of an inch. It can be found by measuring just a bit beyond the quarter-inch mark (0.25 inches) and before the half-inch mark (0.5 inches). If your ruler has 1/16 or 1/32 inch markings, .30 inches would be between the 5/8 inch and 3/8 inch marks. It may be helpful to use a decimal ruler or a ruler with finer increments for precise measurement.
30 centimeters 30 centimeters
The normal size of a ruler should be 12 inches or 30cm. (30 cm=300 mm) (1 in=25 mm)
Sixty centimeters is equivalent to about 23.6 inches. To visualize this length, consider that it is roughly the height of a standard ruler, which is typically 30 centimeters long, so 60 cm would be double that. It's also similar to the length of a small dog or a medium-sized backpack.
The number 886 typically refers to a measurement in millimeters. If you’re using a standard ruler that measures in centimeters and inches, 886 mm is equivalent to 88.6 cm or approximately 34.88 inches. Therefore, it would extend beyond a standard 30 cm ruler, requiring a longer measuring tool.
An English ruler typically has measurements marked in inches and fractions of an inch. The main numbers represent whole inches, while smaller marks indicate fractions such as 1/2, 1/4, 1/8, and 1/16 of an inch. Some rulers may also include centimeters alongside inches for metric measurements. The total length of the ruler is usually 12 inches or 30 centimeters.
If you look at a ruler 12 inches= roughly 30 cm. So 75 cm = roughly 30 inches. 75 cm = 29.53 inches
30 centimeters 30 centimeters
its a stick that has more than 30 inches
30 millimetres is 0.03 metres. That is about the diameter of a two litre cola bottle cap. 1 and 3/16 inches.
A standard metric ruler is just slightly longer than 30 centimetres and slightly longer than 12 inches.The "slightly longer" is for the extra bits of ruler that stick out in front of the 0 (zero) cm/in at the beginning of the ruler and behind the 30 cm/12 in mark at the end of the ruler
A cow's tongue is about the size of a ruler (12 inches or 30 cm) or a foot long.12 inches or 30 centimetres roughly the size of a ruler.
The normal size of a ruler should be 12 inches or 30cm. (30 cm=300 mm) (1 in=25 mm)
The normal size of a ruler should be 12 inches or 30cm. (30 cm=300 mm) (1 in=25 mm)
A metric ruler is 30 cm in length. This type of ruler is commonly called a metric foot ruler because it is similar in length to a one foot ruler.
A metric ruler is a straight tool typically made of plastic, metal, or wood with markings in centimeters and millimeters. It is usually 30 centimeters long (or 12 inches), with smaller divisions for millimeters marked along its length. The markings are used to measure length or distance accurately.
Two inches are 60 cm because 30 cm plus 30 cm is 60, so your answer would be 60 cm and you could see that on a ruler and there is your answer.
The units of length on a ruler are typically in inches and centimeters. Each inch is divided into smaller units, such as eighths or sixteenths, while centimeters are divided into smaller units called millimeters.