Yes, but it takes one more character (a space) to write it the first way.
No, but sometimes "average" means "mean" - when it doesn't mean median, geometric mean, or something else entirely.
The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.
See mean-8. Or get a dictionary.
There is no statistical term such as "deviation mean".
Yes, but it takes one more character (a space) to write it the first way.
3 ohms. 9 volts across a 3 ohm resistor becomes 9/3 or 3 amps.
No, Your original adaptor has an output of 3 amps or 3000 ma. As you can see, the one you want to use for a replacement adaptor only has 1000 ma output, one third of the current capacity that you need.
The amperage usage of a slot machine can vary depending on its size, design, and components. On average, a typical slot machine may use anywhere from 3 to 6 amps of electricity during normal operation. It is important to consult the manufacturer's specifications or an electrician to determine the exact amperage requirements of a specific slot machine.
Let's do some simple math: If a compressor motor takes 3amps to make 100psi at any given time interval (we'll use 5min) it breaks down to about 360-400watts for that 5minutes. No we get a dynamo and backfeed the air through it. The 90 psi will immediately start to drop off, and even if it didn't and you had it connected through. The best you could do (which is impossible) is break even. You'll not save any effort, or money. So although your answer is "yes" I'd have to follow it it with a "not for long."
the simplest solution is by connecting two 120v 3amps heater in series , the same can be used directly on 240v. However the current drawn will still be 3 amps & Not 1.5 amps. The heater output power will be double that of a single heater running on 120v. ( or equvalent to two heaters operating on 120v. supply ) A more expensive method is to use a stepdown transformer which can be powered on 240v & connect the heater on the transformer 120v side. this method will consume approx. 1.5 amps from the 240v supply.
you mean what you mean
It mean what you don't what does it mean.
Mean is the average.
What does GRI mean? What does GRI mean?
The haudensaunee mean irguios
The correct usage is "what DOES it mean"