Well, hello there, friend! 800mA stands for 800 milliamperes, which is a unit used to measure electric current. It's important to understand how much current is flowing through a circuit to ensure everything works properly. Just remember, when it comes to electricity, it's all about finding that perfect balance to create something truly beautiful.
No, but sometimes "average" means "mean" - when it doesn't mean median, geometric mean, or something else entirely.
The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.The answer will depend on who you mean by HE.
See mean-8. Or get a dictionary.
There is no statistical term such as "deviation mean".
No, the geometric mean is not the same as the mean of two numbers.
A 9 volt 800mA rating indicates the power output of the device, with 9 volts being the voltage supplied and 800mA (milliampere) being the current capacity. This means the device can provide a continuous current of 800mA at a voltage of 9 volts.
no
may be its around [5v;800ma]...
Output is: DC10V - 800mA - Center Positive
Yes
No. Your portable radio needs 800mA to operate. Your adapter can only produce 400mA. If you make the connection the adapter will rapidly heat up and probably burn out.
Sportcraft / Unicorn Part# 79534 "AC Adapter - 9V/800MA" 9 Volt, 800MA +/- AC adapter See attached image of official parts re-order form and manual.
Yes. The voltage is the same on each. The ma rating of the power supply is the current the supply can handle before burning up. So if your appliance is designed to work on an 800ma supply, an 850ma supply will do fine.
Yes you can. But it may damage your computers power supply.
The capacity of the 800 mA adapter is 200 mA larger than the 600 mA adapter.
It is usually safe to use lower amperage on appliances, however, unlikely that it will have enough power to operate let alone power on.
Yes. There's a subtle difference in the meaning of the "--- ma" labels on the two units:-- On the "device" ... the unit that uses power ... the "200ma" is the current it useswhile it's operating.-- On the "adapter" ... the unit that supplies power ... the "800ma" is the maximumcurrent that it's able to supply. Anything less than that is easy.So your adapter is OK to operate your device. In fact, with suitable wiring and a bit ofcooling, it could nominally operate 4 of them at the same time.