The difference is in their truth tables.
AND gate: The output is true when inputs 'A' AND'B' are both true.
A | B | Output
0 | 0 | 0
0 | 1 | 0
1 | 0 | 0
1 | 1 | 1
OR gate: The output is true when either input 'A' OR input 'B' is true.
A | B | Output
0 | 0 | 0
0 | 1 | 1
1 | 0 | 1
1 | 1 | 1
Avid is just to prepare you for advanced classes, and college. Gate, well you already have it and have a better chance than someone in Avid
difference between as on and as at
Directly. Their difference IS the difference between them.
The difference is 2,795.
What are difference between scalars and vectors
The difference is that a sluice gate is made out of cast iron while a slide gate isn't.
A gait is how you walk. A gate is like a door.
A Knife Gate Valve is used to slice through sludge /sewerage and a gate is used fro normal positive shut off If you want to find the photo of Knife Gate Valve,you can enter to the link:http://www.kolinkcn.com/
An SCS has an additional gate - the anode gate. It is physically smaller than an SCR and has smaller leakage and holding currents than an SCR.
Avid is just to prepare you for advanced classes, and college. Gate, well you already have it and have a better chance than someone in Avid
A concourse is a large area in an airport where passengers can move between gates, shops, and services. A gate is a specific location within the concourse where passengers board and disembark from their flights.
OS and Y stands for Opposed Stem and Yoke.
a gate valve is a one way totally open or closed valve, a control valve is a variable valve.
the gate of the school she used to go to had fine concrete pillars with the name of the school in large characters.But the gate of two rather short posts that still had twigs and leaves on them.
The basic theory of operation is the same, but the device structure is different. With both a MOSFET and a JFET, a conductive channel is established between two terminals (the drain and the source). The structure of the gate terminal makes the difference between the two. In a MOSFET, the metal gate is separated from the channel by an insulator (the O in MOSFET means Oxide, the insulator). In a JFET the gate is a doped region essentially within the conductive channel.
Using and gate - pla is programmable while pal is fixed
simply by complementing x input before applying to and gate for generating carry