About 1.33 ml.
The volume of an eyedropper typically ranges from about 0.5 to 1 milliliter (mL). Since 1 mL of water weighs approximately 1000 milligrams (mg), an eyedropper can fill around 500 to 1000 mg, depending on its exact volume. However, the weight can vary based on the density of the liquid being measured.
10ml
To find the volume of an irregular object using a graduated cylinder, you can use the method of water displacement. Fill the graduated cylinder with a known volume of water, then carefully submerge the irregular object in the water. The increase in water level corresponds to the volume of the object. Subtract the initial volume from the final volume to determine the volume of the irregular object.
To find the volume of a person's body, one common method is water displacement. This involves having the person fully submerge in a water-filled container and measuring the volume of water displaced, which corresponds to their body volume. Alternatively, body volume can be estimated using formulas based on measurements of height and weight, such as the Boer formula or the Dubois formula, though these methods may not be as accurate as water displacement.
To find the volume of an object using a measuring cylinder and an overflow jar, first fill the overflow jar to the brim with water and place it in a container to catch any overflow. Submerge the object in the overflow jar, allowing the displaced water to spill into the container. Measure the collected overflow water using the measuring cylinder; this volume corresponds to the volume of the submerged object. The volume of the water displaced is equal to the volume of the object.
The volume of an eyedropper typically ranges from about 0.5 to 1 milliliter (mL). Since 1 mL of water weighs approximately 1000 milligrams (mg), an eyedropper can fill around 500 to 1000 mg, depending on its exact volume. However, the weight can vary based on the density of the liquid being measured.
Water displacement works by calculating the volume of water displaced by submerging an object. This volume corresponds to the volume of the object that was submerged.
An average eyedropper can typically hold about 1 milliliter of water.
10ml
water leaves because of the pressure you put on the top of the eyedropper which you squeeze so the pressure pushes down the water or liquid in it.
It depends on the eye dropper, to find out how much your specific eyedropper holds count the number of times it takes to empty a 100ml beaker using it. Divide the amount of water in the beaker by the number of times it took to empty it and you will have a rough approximation of how many mL your eye dropper will hold. A standard small bottle with dropper - one suck which fills the dropper to about 2/3 of its height should be 1 ml.
beacuse
Approximately 30 to 35 drops of water can fit on a US penny before spilling over. The surface tension of the water allows it to form a dome-like shape on top of the penny, holding more drops than you might expect.
One milliliter
It is important to ensure no drops of water cling to the cylinder in the water displacement method because any residual water droplets can lead to inaccurate volume measurements. This can affect the precision and reliability of the results obtained.
A procedure with water displacement is a method used to measure the volume of an irregularly shaped object by placing it in a known volume of water and measuring the change in water level before and after the object is added. The difference in water level corresponds to the volume of the object.
An US gallon has 3,485411784 L; multiply with your value to obtain the total volume. Aassuming that a drop has 0,000 060 L divide the total volume with the volume of a drop and you will obtain the answer.