0
A piece of copper originally 305 mm long is pulled in tension with a stress of 276 Mpa If the deformation is entirely elastic what will be the resultant elongation?
Wiki User
∙ 12y ago
Tension = Module x deformation
Deformation= 2,51x10^-3 = 0,25%
Wiki User
∙ 12y ago
Anonymous
276Mpa
Add your answer:
Earn +20 pts
Is it possible to build a fire proof building?
No. You can help fire proof a building. But there is always a chance it can catch on fire somehow. Fire sprinklers are only used to keep the fire under control so it doesn't spread...they are not used to put the fire entirely out. Firefighters are for that. Anything that you use to fire proof a building is only used to keep the fire under control until the Firefighters arrive. The closest you can get to a fireproof building is a brick one with a terracotta tile roof.
What is the young's modulus of plexiglass?
Well this entirely depends on the "type" of glass you are talking about and whether its a sample or an artefact/material. as Youngs modulus = stress / stran..... where the ratio is constant. stress being sigma and strain being epsilon. If its just glass as in general (material) then its around 65 - 90 GPA . not MPA as GPA is for stiff materials. the justinator
How do you solve servo feedback error?
The question is not entirely clear, but I can think of two meanings: 1...All servos have a "follow-up error". This is the amount by which the slave fails to align itself with the master. This amount should be small, and is an inverse function of the system loop gain...ie: The greater the loop gain, the smaller the follow up error. The downside is that if the gain is too high, the servo may hunt or go unstable. 2...All servo systems use some sort of "tell-back" device, such as a synchro or sin/cos potentiometer, which reports the actual position of the slave so that it can be compared to the position of the master. If that device is inaccurate, then servo follow up errors will result. The cure is to use a more accurate (Probably more expensive) device. If this is not what you wanted to know, please let me know.
What are the weaknesses of cast iron?
Cast iron has been used for centuries, and was used occasionally in architecture in the pre-modern period. It was in 18th century Britain that new production methods first allowed cast iron to be produced cheaply enough and in large enough quantities to regularly be used in large building projects. One of the first important projects was The Iron Bridge in Shropshire, a precedent setting structure made almost entirely of cast iron. However, it was grossly over-designed, and the makers (principally Abraham Darby) suffered financially as a result. The quality of the iron used in the bridge is not high, and nearly 80 brittle cracks are visible in the present structure. Later designers and engineers, such as Thomas Telford improved both the design and quality of the material in his bridges (for example, at Buildwas upstream of Coalbrookdale) and aqueducts (such as the world-famous Pontcysyllte Aqueduct in North Wales.)Architectural use
What is difference between hydraulic cylinder And pneumatic cylinder?
1. Working fluid : Pneumatics use air, Hydraulics use Oil2. Power : Pneumatic power less than hydraulic power3. Size : P components are smaller than H components4. Leakage : Leaks in hydraulics cause fluid to be sticking around the components. In pneumatics air is leaked into the atmosphere.5. Pneuatics obtain power from an air compressor while hydraulics require a pump6.Air is compressable, hydraulic oil isn'tHydraulic oil is slightly compressable particularly when air is entrained within itHydraulics can also attain power from an air accumulatorPNEUMATIC POWER IS NOT BNECESSARILY LESS THAN HYDRAULIC POWERTHE LOSSES TEND TO BE GREATER IN PNEUMATICS BUT THIS IS DUE TO ENGINEERING RATHER THAN CHARACTERISTICS.Pneumatics are much easier to configure for control applicationsI disagree with answer 3 above, it depends on the application.XDMiss.godgivenhope@hotmail.comPneumatic machines use the power of compressed air to perform work.Hydraulic machines use the incompressibility of water under pressure to perform work.
Did The Ramones cover What I Like About You?
I think it was originally by the Romantics, but I'm not entirely sure. Awesome song though. I think it was originally by the Romantics, but I'm not entirely sure. Awesome song though. I think it was originally by the Romantics, but I'm not entirely sure. Awesome song though.
Originally the Old and New Testaments were written all in Hebrew?
Only the Old Testament was originally written almost entirely in Hebrew. The exception being parts of Daniel. The New Testament was originally written entirely in Greek, although there is some evidence Matthew first wrote his Gospel in Hebrew.
Did brigham young have relatives in new york?
It's entirely possible, although he himself was originally from Vermont.
What is the difference between devoted and dedicated?
Dedicate means to set something apart for a purpose ( originally religious). Devote means to give something entirely to a purpose (originally religious).
what languages was the original bible written in?
The Old Testament was originally written in Hebrew, with some parts in Aramaic and a few words of Persian.The New Testament was originally written in Greek.aramaicAnswer:The Old Testament was written primarily in Hebrew, with some portions written in Aramaic. The New Testament was originally written entirely in Koine (common) Greek.
Who is Brandon Simpson?
It entirely depends on which Brandon Simpson you're referring to. Several come up in a web search. One of them is a sprinter originally from Jamaica.
Why is mincemeat named as such but contains no meat?
Originally Mincemeat pies were made with meat in them, but this has been replaced almost entirely in modern times with dried fruit and nuts.
Was lacrosse originally invented just for boys?
Originally, lacrosse was a Native American sport for the men of an Indian tribe. The game was a contest of strength, speed, and toughness. Women were not originally suppose to compete in the game because of the dangers it posed. No pads were used whatsoever, and the now common term a "check" was on an entirely different level. So, to answer this question: No, lacrosse was not originally for women. It was a guys sport but obviously, this has changed.
What creates the energy in a camera?
Originally 100 years ago cameras were entirely mechanical, and needed no energy. These days they use batteries as the power source to make everything work.
How much does guild wars cost originally?
depends entirely on which game you buy, where you buy it from and weather or not the game's bought second hand. I've seen Prophecies from as low as £5
Where is the region of Dulwich located?
Dulwich is an area of South London in England. Originally Dulwich was entirely in the London Borough of Southwark but as it has expanded it now stretches also into the London Borough of Lambeth.
What operating system is usually associated with C?
The C programming language was originally created for Unix. Unix, and most other Unix-like systems such as Linux, are written almost entirely in C.
