Yes
Because it is strong enough to keep the sheave wheel in place
So that it can be stronger
Im going to tell you how to fix a broken frame. First, you need loctite glue, and a protractor. Get your broken glasses, and frame. Put the glue on the tip of the broken frame. Measure the frame to 90 degrees. Then glue it on. Wait for about an hour or two. Then tada! You have a good frame on your non-broken glasses! Hope this helped. :DDD
First, if the key is only slightly jammed, wiggling and jiggling it might work it loose. However, I am assuming that if you are asking this question, the key must be good and jammed. If that is the case, the only way I know of is the following; however, it involves destroying the key and therefore, you should be prepared to obtain a new key from a locksmith. First, hopefully the door is unlocked, or open. If it is closed and locked, you will have to try the following. Remove the hinge pins from the door by tapping them out with a hammer and a centre punch, nail, or other pointed metal instrument. Once the hinge pins are out, try pulling the door away from the frame from the hinge side. You should then be able to remove the door from the frame even if the deadbolt is locked. (Note: This assumes you are on the side of the door where the hinge pins are visible. If not, you will have to access the other side of the door via a window into the room. Good luck!) Once you have gotten the door open by these means (if necessary), remove the doorknob, then the escutcheon plates (face plates with the keyhole in them). This will expose the hole drilled in the door for the keyhole, and the lock case itself. Now take a pair of locking pliers ("Vise Grips") and grab onto the shank of the key as close to the lock case as possible. Work the pliers back and forth until the key breaks off. Hopefully, the break will occur as close to the lock case as possible. Now, remove the screws from the edge of the door which hold the lock case in place. You should now be able to slide the lock case out of the door. Unscrew the cover from the lock assembly and extract the broken piece of key, being careful not to disturb any of the tumblers (levers), springs, etc. Good Luck!
The terminator
compered with geomatic and surveying,who is good
ultimate skull crusher
To make a good freeze frame or tableau in drama the most important thing is that you keep your focus and stay in character Hope This Helps!
Like most religions/philosophies, Buddhism supports "good" as being better than "bad". Peace is generally seen as a "good" thing and is supported.
They cost a pretty good bit . The magnifying part is expensive. My frame cost 38 dollars and my magnifying thing cost a pretty good bit
will work good 2004 or 2006 crown vic in 1953 ford truck same size frame will work good just add thing will be fine qqqq
FrameByFrame, its an apple product
It has no frame. It is a unibody construction.
Make sure that it is made of quality materials and that it has a good finish on the frame.
Supports your body
There is no such thing. Windows can only read floppy disks that are in good condition and have a file system it supports, namely FAT12 or FAT16.
It holds everything together and makes it look good like a picture frame
It can be on any thing on pictures in school or at you're frends place, and a frame a the beach or something like that or so. you are going to do a good job on 4/27/11.
Good quality wood frames are available from many shops online and offline. Some examples of shops that sell good quality wood frames include American Frame and Frame USA.