Yes,It depends if it is gas fired or electric.
air handler
Dissipates the heat produced by the heat exchanger through convection and creates static and velocity pressure to distribute the hot air throughout the duct system.
form_title=Central Humidifier Installation form_header=7443 Please state the type of furnace you have.*= () Forced air gas () Forced air electric () Other What is the location of the furnace?*= () Attic () Garage () Closet () Roof () Other
There are actually many types of plate heat exchangers, and the YOJO brand has introduced brazed plate heat exchangers and gasket plate heat exchangers. Today is the home of brazed heat exchangers.Brazed plate heat exchangers have no headers, tie rods or sealing gaskets, and the plates are brazed at a temperature of 1100 ° C. During the assembly stage, a piece of brazing material (usually copper, and nickel) is placed between the two plates, the package is compressed, and then baked for several hour.BPHE is more compact and lighter, and the brazing material has the functions of both washer and frame. The intersection between the corrugations of the two coupling plates forms a dense network of contact points, which impart pressure tightness and generate vortex flow, thereby improving heat exchange. In this way, even at low nominal input speeds, the turbulence of the fluid is high, and for low flow rates, the fluid flows from laminar to turbulent.
None. Probably the home was built for forced air and converted to boiler/baseboard heating.
air handler
You must have a heat pump with electric auxilliary heat.
The airflow on a furnace is typically directed from the return air ducts to the heat exchanger and then out through the supply air ducts to distribute heated air throughout a building.
no heat would flow
no heat would flow
No, furnaces are forced air heat. Boilers are hot water heat.
This means there is a blower attached to the system that forces the heat into the home.
The heat exchanger is the metal wall or tubing that is heated up when the burners are ignited. The inside of the heat exchanger allows the toxic flue gases produced from the burners to exhaust out through the furnace flue. The outside of the heat exchanger is where the cold air passes over, becomes warmed, and is blown throughout the ductwork of the home. The heat exchanger is the only wall separating the toxic flue gases from the supply air. If a crack develops in the heat exchanger, there is a potential for carbon monoxide gas to leak over to the supply side and be blown throughout your rooms. Carbon monoxide gas is odorless. The human senses will not detect its presence. Ron Ferrara- DHR Mechanical Services, Inc.
you can get an answer from someone else than me thank you It means that your burners are not adjusted correctly and the flame is rolling out of the heat exchanger. You need to have this fixed. Usually your locally utility company will give you an honest answer and what needs to be adjusted.
Gas furnace burners function by mixing natural gas with air and igniting it to create a controlled flame. This flame heats up a heat exchanger, which then transfers the heat to the air that is circulated throughout the heating system.
A forced air heating system uses a furnace to heat air, which is then distributed throughout the building via ductwork and vents.
There should be only one blower to move the air. The unit will have a coil for cooling and a heat exchanger.