A scale model of a Roman aqueduct will have water flowing from a higher source into a series of channels. An easy way to accomplish this would be to stack different size plastic bowls, with the smallest at the top. Each bowl will have a small hole in the bottom for drainage. The bottom bowl could be sitting on a piece of sod with ditches cut into it.
Sorry, but engine connection cannot be defined without make and model of engine and tiller.
if you would like to make a model of a catapolt you will need:woodmaybe metellots of gluecardboardthe things that will help you make it is:a hack sawa sping clampa g. clampgluecardboard cornerslynx joinerthanx!!! dats my answers! lol
Research and make models of some of the building machinery from ancient civilizations. You can also try to make any working model of a simple mechanism, I'm making oldham's coupling
the tube is elliptical because this is all part of the design which makes it elastic and tensile . as the tube is pressurised from within, this tends to make it uncoil and move in an outward direction , which causes a small movement within its quadrant gear and results in a pointer moving across a scale . as the pressure within is reduced the tube tends to return to its previous shape and coil back towards the centre of the gauge .
In Alberta a Journeyman can make $34 - $42 an hour, and if you go out on your own then you can make much much more!
If you are referring to making a model Roman aqueduct, you can find websites which tell you.
The remains of Roman aqueducts are in Rome itself, Italy, Britain, France, Spain and Israel. These are just the above ground aqueducts. There are numerous underground aqueducts running throughout what was the Roman empire, as most of the aqueducts were underground. Many of them are either still in use today or can be put in use if needed.
Exist? No, not at present. but you can rest assured that the practical Romans had maps of their aqueduct systems as this would have been necessary in case of repairs or any changes. As you know, the majority of Roman aqueducts were underground and this very fact would make mapping them essential.
Make your tree in between scales but not the same size as any scale.
You can make it with alot of things, be creative! You could use Styrofoam, you could use wood, or simple household items! Sugar cubes stick together great when fluff is used as the cement, you could make it out of that! It's up to you!
I doubt that you can make a model of an empire. If anything, you can make a map of an empire.
just make it out of paper
Its purpose is to Carey water from one place to another.It was first used in the tenth hundreds B.C.E.
You can simply find it on google, when you tick in 'lego roman aquaduct'. The first one is immediately the best, I think.
clay, chisel, fork (for fur), toothpick.
A mathematical model A structural model A scale model A working model A prototype model A make (e.g. a Lincoln convertible or a model T Ford) of car. A catwalk model (e.g. Twiggy)
Use glue and sugar cubes.