answersLogoWhite

0

Clothes Airer Installation guideCAUTION: Your ceiling must be capable of supporting the weight of the unit when full of damp laundry. If in doubt contact a qualified person to assist you with installation.
  • Measure the space where you are going to install your Laundry Maid and ensure the centres of the two ceiling pulleys are less than the overall length of the wooden rails and there is clearance space at either end.
  • The double pulley should be approximately two feet away from the wall you will be fixing the cleat that is used for tying off the pulley ropes.
  • Mark the two centre points on the ceiling.
  • Drill two pilot holes large enough to enable the pulleys to be screwed by hand into the ceiling joist and then screw the pulleys into position.
  • Fix the cleat to the wall, in line with the two pulleys.
  • Slide the wooden rails into the rack ends on the floor and position the rack directly under the two pulleys.
  • Pass one end of the rope over the back wheel of the double pulley, then over the single pulley wheel. Pull the rope down and tie it to the top of the rack end under the single pulley.
  • Does the same thing with the other end of the rope, but this time only pass the rope over the front wheel off the double pulley and down to the other rack end, tie as before.
  • Now start to pull the clothes airer up into position using both ropes to get it level. When you are happy with the height of the airier, tie a knot in the rope just under the wall cleat. When you pull the clothes airer up, hook the knot under the wall cleat. When the airer is in the loading position adjust the rope to suit the desired height and tie-off on the cleat.
User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the name of the pulley on a 1997 dodge stratus 2.5 V6?

There is a crankshaft pulley, alternator pulley, power steering pump pulley, AC pulley, idler pulley, tensioner pulley, etc.


What is a compound pulley?

a coumpound pulley is when there is a fixe pulley and movable pulley working together


What is compound pulley?

a coumpound pulley is when there is a fixe pulley and movable pulley working together


Which simple machine can help us to move a sail on a sailboat?

pulley


What causes a pulley to wobble?

Things that might cause a pulley to wobble: The pulley is bent. The shaft the pulley is on is bent. The pulley is mounted crooked.


What is the velocity ration of a pulley?

The velocity ratio of a pulley system is the ratio of the rotational speed of the driving pulley to the driven pulley. It indicates how the speed of the driven pulley relates to the speed of the driving pulley. The formula is: Velocity Ratio = Diameter of driving pulley / Diameter of driven pulley.


Is a faucet handle considered a pulley?

No, it is not a pulley. A pulley has to half effort.


What is the function of pulley?

Pulley reduces the force given to get the work done. There are amny types of pulleys. Examples are fixed pulley, movable pulley and Combined pulley.


How do you remove a pulley with out a pulley puller?

If you pry up on the pulley with a bar on each side of it and while keeping pressure on the pulley, hit the end of the shaft that the pulley is on with a brass mallet, the pulley will usually break free.


How can a fixed pulley and movable pulley be put together?

With the string from the movable pulley


Where is the crankshaft pulley on a 98 ford zx2?

The crankshaft pulley is the lowest pulley on the engine. Looking at the engine from the front which is looking at it from the passenger side fender the crank pulley is on the bottom of the engine and has a pulley with a pulley behind it with teeth on it.


How do you use pulley for automobile?

pulley for what?