0
What else can I help you with?
What is double slider-crank mechanism?
Double slider crank mechanism is used where two slider works or the crank also work as a slider it uses to transform Reciprocating motion into rotary
How did work done by the steam engine compare to work done by horses?
the steam engine was quicker and stronger than hoses
How does the caterpillar engine work?
Same as a regular car engine but to give it the extra power it has some more cylinders
What is the heat engine?
a machine that transforms heat into machanical energy, or work
What are the elements of a diesel power plant?
ESSENTIAL ELEMENTS OF DIESEL POWER PLANT Fuel Supply System It consists of storage tank, strainers, fuel transfer pump and all day fuel tank. The fuel oil is supplied at the plant site by rail or road. The oil is stored in the storage tank. From the storage tank, oil is pumped to smaller all day tank at daily or short intervals. From this tank, fuel oil is passed through strainers to remove suspended impurities. The clean oil is injected into the engine by fuel injection pump. Air Intake System This system supplies necessary air to the engine for fuel combustion. It consists of pipes for the supply of fresh air to the engine manifold. Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder. Exhaust System This system leads the engine exhaust gas outside the building and discharges it into atmosphere. A silencer is usually incorporated in the system to reduce the noise level. The exhaust system of a diesel engine performs three functions. First, the exhaust system routes the spent combustion gasses away from the engine, where they are diluted by the atmosphere. This keeps the area around the engine habitable. Second, the exhaust system confines and routes the gases to the turbocharger, if used. Third, the exhaust system allows mufflers to be used to reduce the engine noise. Cooling System The heat released by the burning of fuel in the engine cylinder is partially converted into work. The remainder part of the heat passes through the cylinder wall, piston, rings etc. and may cause damage to system. In order to keep the temperature of the engine parts within the safe operating limits, cooling is provided. The cooling system consists of a water source, pump and cooling towers. The pump circulates water through cylinder and head jacket. The water takes away heat form the engine and it becomes hot. The hot water is cooled by cooling towers and re circulated for cooling. Lubricating System The system minimises the wear of rubbing surfaces of the engine. It comprises of lubricating oil tank, pump, filter and oil cooler. The lubrication oil is drawn from the lubricating oil tank by the pump and is passed through filter to remove impurities .The clean lubrication oil is delivered to the points which require lubrication. The oil coolers incorporated in the system keep the temperature of the oil low. Engine Starting System This is an arrangement to rotate the engine initially, while starting, until firing starts and the unit runs with its own power. Small sets are started manually by handles but for larger units, compressed air is used for starting. In the latter case, air at high pressure is admitted to a few of the cylinders, making them to act as reciprocating air motors to turn over the engine shaft. The fuel is admitted to the remaining cylinders which makes the engine to start under its own power.
What are the ratings and certificates for Thomas the Tank Engine and Friends - 1984 Dirty Work 11-4?
Thomas the Tank Engine and Friends - 1984 Dirty Work 11-4 is rated/received certificates of: Australia:G
How does thomas the tank engine work?
Thomas the Tank Engine is a fictional character from the children's book series "The Railway Series" by Rev. W. Awdry. He is a small blue steam engine who lives on the railway of the fictional island of Sodor. Thomas works hard and is often depicted getting into various adventures with his friends on the railway.
What has the author Christopher Awdry written?
Christopher Awdry has written: 'Thomas' Book and Toy Gift Set (Gift Sets)' 'Railways Galore' 'Duck and the Parrot' 'Thomas and the Hurricane' 'Percy and the Postman' 'Busy engines' 'Tell the Time with Thomas' 'Thomas's amazing pop-up train set book' 'More About Thomas the Tank Engine (Railway)' 'James and the Balloons (Mini-Books)' 'Henry and the Ghost Train (Mini-Books)' 'Gordon the High Speed Engine (Railway series)' 'Really useful engines' -- subject(s): Fiction, Railroads, Trains 'Thomas and the Fat Controller's engines' 'Henry Pulls the Express' 'Thomas and the Bad Dog' 'Chuff, Chuff, Here Comes Thomas' 'Thomas Wipe Clean (603555241)' 'Thomas and the Pony Show (Mini-Books)' 'The Nene Valley Railway (Past & Present Companions)' 'Gordon the high-speed engine' -- subject(s): Fiction, Railroads, Trains 'Thomas and the Tiger' 'Thomas and the Station Cat (Lift-the-flap Book)' 'Percy and the kite' 'Tomos Yn Mynd I LAN Y MOR' 'Thomas and the Dinosaur (Thomas Easy-to-read Books)' 'Thomas Goes to the Seaside' 'James and the Signal' 'Thomas and the Pony Show (Thomas Easy-to-read Books)' 'Thomas Comes Home (Railway)' 'More bad days for Thomas and his friends' 'Tell the Time with Thomas (Thomas & Friends)' 'Thomas Catches a Thief' 'Thomas Big Book of Games & Puzzles' 'James and the Ballons' 'Edward and the Bear (Thomas the Tank Engine Board Books)' 'Learn with Thomas' -- subject(s): Fiction, Juvenile literature, Literary recreations, Railroads, Thomas the Tank Engine (Fictitious character), Trains, Vocabulary 'Henry Goes to Hospital (A Thomas Easy-to-read Book)' 'Thomas and the Evil Diesel' 'Brunel's broad gauge railway' -- subject(s): Great Western Railway 'Thomas's Easy Reading Book' 'Thomas and the Missing Christmas Tree (Thomas the Tank Engine: Send-a-story)' 'Henry and the ghost train' 'Thomas' Amazing Pop-Up Book Train Set'
How does a gas tank work?
you put gas in at the top, and it hold it until it leaks or until it pumps it to the engine
What is another sentence for mechanism?
The mechanism doesn't work properly.
How does a mechanical governor work?
A mechanical governor uses centrifugal force to regulate the speed of an engine. As engine speed increases, the governor mechanism moves outward, reducing the amount of fuel going into the engine. Conversely, as engine speed decreases, the governor mechanism moves inward, allowing more fuel to enter the engine. This system helps maintain a constant speed under varying loads.
Why is a fuel pump needed?
A fuel pump is needed because you need to move fuel from the tank to the engine at the appropriate rate to get the engine to work the way you want it to.
How do World War 1 tanks work?
First you make sure your ammuntion is right next to you. Then you make sure you're in the tank and that it's in on. Make sure its a tank and not an abnormally large male. Then load the ammunitaion in the firing mechanism and fire at your target.
How does a petrol tank from a car work?
The petrol tank on any vehicle does not actually do any work at all, it's only function is to store the petrol that your vehicles engine runs on, the part that does the work is the petrol ( or fuel pump as it's also called) pump that is located in many different locations depending on make and model (on most motorcycles there is not even a fuel pump, petrol is simply gravity fed to the engine) on some it's in the petrol tank, and runs on electricity, on others it's in the petrol line somewhere between the tank and the engine (on most cars it's on the side of the block and runs off an extra lobe on the camshaft or a gear run off the crankshaft) The pumps job is of course to pump the petrol from the holding tank to the engine at a pressure that the engine needs it fed to it.
How does a Conley V8 engine work?
A Conley V8 engine is operated by pumping the oil that is in the holding tank. It is used in factories to pump oil, and dig up gardens. That is how the Conley V8 engine works.
Does tomy fit trackmaster train sets?
The motorized Tomy brand Thomas the tank engine and friends Engines and cars will work on the Fisher-Price brand playsets. The Tomy brand blue tracks require an adaptor to connect to the tan or brown Fisher-Price tracks.
How does the float-cup fill valve work in a toilet's water tank?
The float-cup fill valve in a toilet's water tank works by using a floating cup that rises with the water level. When the water level drops, the cup falls and triggers the valve to open and refill the tank. This mechanism helps maintain a consistent water level in the tank.
