answersLogoWhite

0

A refrigeration circuit is provided with a quench line connecting the liquid line and the suction line and containing a QEV. The QEV is controlled responsive to the superheat of the refrigerant supplied to the compressor. By injecting liquid refrigerant downstream of the suction modulation valve and the sensor for the TXV, the system can be operated at low capacity without overheating the compressor oil.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

How does a four way hydraulic valve work with a power beyond port?

Closed centre sytems, (where the valve stops the pumps oil flow completely when in neutral), don't need power beyond as the oil pressure supply is piped to all valves simultaneously. Power beyond is for open centre systems, where the oil keeps flowing, returning to tank, even when no work is being done. Without power beyond, you couldn't add a second or third valve (because the oil, being able to return to tank from the first valve has no resistance. So power beyond plugs the flow in the first valve causing the oil to flow to the second valve, instead of to tank. The second valve (or the last valve if there are more than two), allows the oil to flow to tank, and so complete it's circuit.


What happens to a quench hardened tool or machine part that was not tempered when it is subjected to shock loads or bending stress?

cass iron verse steel


What is the Pressure drop in glove valve?

You mean GLOBE valve and that would depend on the size of the valve and the maker


Which valve is the preferred valve to use as flow control valve at the pump discharge 8 inch size ball valve can be used for the same application?

I would use a butterfly valve to set the flow and a pitot tube to measure it. Nexus Valve makes a good one and it is price competetive as well.


What is Difference between relief valve and safety valve?

Relief valve always position in the suction line in oreder to relief the extra pressure, while safety valve is always placed at discharge line to release excess pressure.I would take that one step further by stating that a " RELIEF VALVE" is one that is "meant" to be lifted off its seat, as opposed to a "SAFETY RELIEF VALVE" which is not!DIFFERENCE BETWEEN RELIEF VALVE AND SAFETY VALVE:1. Releif valve is applicable in the fluid system.safety valve is applicable in the gaseous system.2.Relief valve opening is directly proportional to the pressure rise.Safety valve opening is will happen at after reaching the setpressure.3.Mode of relif vlave line is again connected to the suction.But in the safety valve is just vent-out there is no connection tosuction.