5 Tons is equal to about 60,000 Btu per hour.
2000 cfm. 400 a ton.
One ton of cooling = 12000 btu. Most homes use between 1-5 ton A/C's. Or, 12000-60000 btu of cooling. A 75 ton would be a massive unit! We're talking school bus sized!
The York HVAC unit model B2H2060A06A has a tonnage of 5 tons. This model typically indicates its cooling capacity, where 1 ton equals 12,000 BTU/h, making it suitable for larger residential or commercial spaces. Always refer to the manufacturer's specifications for confirmation.
A 5-ton boiler refers to a steam or hot water boiler's capacity to produce 5 tons of steam or heated water per hour. This measurement indicates the boiler's efficiency and output, with one ton of steam being equivalent to 2,000 pounds of steam per hour. Such boilers are commonly used in industrial applications for heating, power generation, or process heating. The term "ton" is derived from the amount of cooling or heating capacity required to raise or lower the temperature of water in a specified time.
chequered plate 5 mm thickness weight is 45.4 kg
A lot more then 4 ton but not as much as 6 ton 1 ton for every 600sqft so it will easily take care of 3000sqft
How much freon does a 5 ton heat pump hold?
A 5-ton AC unit can typically cool a space of about 1500-2000 square feet, depending on factors such as insulation, ceiling height, and local climate conditions. It's important to have a professional assess your specific cooling needs to ensure proper sizing.
4.25 kg refrigerant required for 5 ton A/C
5 ton.
YES of course a 5 ton air conditioner can cool a commercial kitchen provided it is of a renowned and a good company!
Yes, a 4-ton air conditioner can be replaced by a 5-ton unit, but it's essential to evaluate the specific cooling needs of the space. A larger unit may cool the area more quickly but could lead to short cycling, reduced efficiency, and increased energy costs. It's advisable to consult with an HVAC professional to assess the system's requirements and ensure proper sizing for optimal performance and comfort.
The rough estimate is that one ton covers 600 sq ft. So a 5 ton unit would sufficiently cool 3,000 square feet of living space. Be careful though ... more 'tonnage' does not make for better cooling.
A 5-ton air conditioning unit typically has a cooling capacity of about 60,000 British Thermal Units (BTUs) per hour. This is calculated by knowing that one ton of cooling is equivalent to 12,000 BTUs, so 5 tons equals 5 x 12,000 BTUs. Therefore, a 5-ton unit provides adequate cooling for larger spaces.
Whatever the manufacture of the unit recommends. Normally it would be 60 amps.
I own this model. It's a 10 SEER, 5-ton unit.
Yes, a 5-ton AC condensing unit can work with a 4-ton evaporator coil, but it may not operate optimally. The mismatch can lead to issues such as reduced efficiency and potential short cycling, as the larger condensing unit may cool the space too quickly without allowing the coil to effectively absorb heat. It's generally recommended to match the sizes of the condensing unit and coil for optimal performance and efficiency. Always consult with an HVAC professional for specific compatibility concerns.