0
Labrynth seal clearances depend up the diameter of the rotating shaft, bearing clearance & temperature of the lubricating medium. As ageneral thumb rule the clearance must be 0.03 mm per 1" dia of shaft.
Wiki User
∙ 15y ago
Wiki User
∙ 12y agorefer to makers specifications
Add your answer:
Earn +20 pts
What is the maximum possible clearance between shaft with radial O ring and cylinder to hold 5 bar hydrostatic pressure?
It depends on the diameters of the shaft and the O-ring. Whether or not it rotates, or slides, how many O-rings or seals are on the shaft, and the thickness of the cylinder head. Consult the manufacturer of the cylinder for the proper clearances required.
Can you increase the shaft diameter on a Briggs and Stratton horizontal shaft?
I am afraid not Depending on the size of the shaft on the thing you are putting on it is possible to get a bushing made to increase the size of the shaft. Go to your local machine shop and ask if they can make one.)
What is the shear strength of a 1 inch diameter steel shaft?
44,000 psi Steel has a shear strength (in single shear) of 44,000 psi; in double shear of 88,000 psi. The area in shear is the diameter of the shaft times the length of the shaft under stress. If it passes through two 1/4" plates with forces acting in opposite directions the shaft will fail with the application of 22,000 pounds of force. If it passes through three sheets of 1/4" plate (with the force on the center plate opposite the other two) the plate will fail with the application of 23,750 pounds of force (compression {crush} failure).
What is h9 tolerance limit for a 8mm diameter shaft?
UPPER TOLERANCE: 0.0MM LOWER TOLERANCE: -.062MM Source: Michelin Quality Requirements Manual 1993
What is the proper name of a square key between a pulley and the motor shaft?
It is simply called a key
Difference between interference fit and clearance fit?
When assembling two parts, if the shaft is larger then the hole, you then get an interference because the shaft won't fit. A clearance fit is an assembly where a part enters a matching hole with a slightly larger diameter for easy joining or easy removal.
What is the clearance fit?
A clearance fit is an a assembly where there is a space between the two parts. The shaft is always smaller than the part it fits into.
How do you choose bevel gear diameter?
the inner diameter is the shaft diameter the out diameter you have to calculated
How to calculate the propeller shaft bearing clearance after measuring the propeller shaft drop of a ship?
Loser loner major wannabee
Relationship between volume of cube and diagonal length?
3 meter shaft is connected to a motor to a generator calls for the use of the use of the shallow shaft with an inner diameter of 100mm and the outer diameter of 150mm.knowing that the allowable shearing stress is 85 Mpa . determine the maximum torque that can be transmitted a) by the shaft as designedb) by a solid shaft of the same weight the material density is7800kg/m^3 .
How do you find diameter of a shaft when bearing no is given?
How do you find dia meter of shaft when bearing no is given?
How do you find diameter of shaft through bearing number?
To find the diameter of a shaft through a bearing number, refer to the manufacturer's bearing catalog or specification sheet. Look for the bearing's bore size, which represents the inner diameter of the bearing. The shaft diameter should match the bore size to ensure proper fit and functionality.
Torsional rigidity of a solid circular shaft of diameter d is proportional to?
inversly proportioal to cube of diameter
What is the shaft diameter of a traxxas vxl 3500 motor?
3mm
What is the maximum possible clearance between shaft with radial O ring and cylinder to hold 5 bar hydrostatic pressure?
It depends on the diameters of the shaft and the O-ring. Whether or not it rotates, or slides, how many O-rings or seals are on the shaft, and the thickness of the cylinder head. Consult the manufacturer of the cylinder for the proper clearances required.
How is the medullary index of hair calculated?
The medullary index measures the diameter of the medulla relative to the diameter of the hair shaft. MI= Medulla Diameter -------------------------- x 100 Hair Diameter
What is the shaft diameter of a number 1 Phillips screwdiver?
Mine is 5 mm
