0
What else can I help you with?
How much steam is required to produce 5 MW power in steam turbine?
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
What is steam rate?
Steam rate means how much mass of steam entering into system per time.........
Why was the steam engine an improvement in powering work?
Before the steam engine, the best one could hope for machines in work was wind- or water-mills. The steam engine generated much greater power, allowing not only more reliable results, but longer distances on which that energy could be used.
Why in steam turbine maintain steam temp 535 degree Celsius?
IT is not accurately 535 c.... The water should be in the super heated condition... So we go to like a higher temperature region and also higher pressure region to change the steam as super heated steam and then the steam is allowed to expand in the steam turbine... now the power gained is much higher than the water flowes at saturated condition like (200 c - 300 c )... so only we are moving to higher temperature and higher pressure region
What did James Watt do to the steam engine?
In 1765, an engineer named James Watt was asked to repair a model of a Newcomen engine. While fixing it, he saw ways to improve it. He added a box called a condenser that helped keep the piston cylinder hotter. Watt also figured out how to have the steam push the piston in both directions, making a faster engine. Watt's improvements made the steam engine much more efficient. Watt also came up with the idea of comparing the power of his steam engines to the amount of work a horse could do.
How much steam is required to produce 5 MW power in steam turbine?
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
How much electrical power is required to run this steam cleaner?
This steam cleaner does not use any electrical power.
How much surface area required to generate one ton of steam?
It depends on how long you are prepared to wait!
How much coal is required to generate 1 ton of steam?
On average, it takes about 0.4 to 0.5 tons of coal to generate 1 ton of steam in a coal-fired power plant. However, this can vary depending on the efficiency of the plant and the quality of the coal being used.
How much steam is required to produce1MW in 60 mw power plant?
To produce 1 MW of electricity in a 60 MW power plant, the amount of steam required depends on the plant's thermal efficiency and the specific energy content of the steam. Typically, a steam power plant operates at an efficiency of around 30-40%. Assuming an efficiency of 35%, it would require approximately 2,500 to 3,000 kg of steam per hour to generate 1 MW of electricity, although this can vary based on the specific design and operating conditions of the plant.
How much power do you get from a steam turbine?
The power output of a steam turbine depends on various factors such as turbine size, steam pressure and temperature, and efficiency. Large steam turbines in power plants can generate hundreds of megawatts of electricity, while smaller turbines in industrial settings may produce tens to hundreds of kilowatts.
How much diesel fuel needed to generate 1 ton of steam?
80 Kgs
How much power can a steam engine produce?
The power output of a steam engine can vary widely depending on its design, size, and application. Small steam engines may produce only a few horsepower, while larger, industrial steam engines can generate thousands of horsepower. For example, the steam engines used in locomotives typically produced between 500 to 2,000 horsepower. Ultimately, the specific power output depends on factors such as steam pressure, engine efficiency, and operational conditions.
How much power can the average steam train produce?
The average steam train can produce around 1,000 to 3,000 horsepower, depending on its design and size. Larger locomotives, particularly those used for freight, can generate even more power, with some capable of exceeding 4,000 horsepower. The power output is influenced by factors such as the boiler pressure, the size of the cylinders, and the efficiency of the steam engine. Overall, steam trains were significant engineering achievements, providing substantial power for their time.
How much power is needed to power a railgun?
The power needed to power a railgun can vary depending on its size and intended use, but it generally ranges from tens of megawatts to hundreds of megawatts. This power is required to generate the electromagnetic forces that accelerate the projectile to high velocities.
Why did the number of coalfields increase during Victorian times?
In the Victorian Era, the majority of power was generated by steam, which was done by burning coal. The increased urbanization and Industrial Revolution created the need for much more power, and therefore more coal to generate it.
How much coal is required to generate 1 MW electricity?
an all nighter
