answersLogoWhite

0

a hydraulic device multiplies a force by applying the force to a small surface area. The increase in pressure is then transmitted to another part of a confined fluid, which pushes on a larger surface area. /\ | |__ this is pascals principle not the right answer..

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

How do you to select a pneumatic hammer which can give 25 g force?

It depends on air pressure in the pneumatic system. You pneumatic systems for high and low air pressure to force change. This is the compressor power.


What is hydraulic lifts?

Hydraulic lifts utilize a hydraulic piston or ram, typically oil filled, to supply the lifting force for raising or lowering an object/load. These hydraulic systems are usually subdivided by the initial force that drives the hydraulic pump which supplies pressure for the piston. Air/Hydraulics (air over hydraulics) and Electric/Hydraulics (electric over hydraulics) are the two most popular types of power supplies for hydraulic driven systems. Cables and pulleys are often incorporated in hydraulic systems to provide equalization between multiple hydraulic cylinders that must work in unison and to remotely transfer the lifting force to areas where a large cylinder would be impractical to locate.


What mechanical system uses a pulley and a pneumatic?

A mechanical system that uses both a pulley and pneumatic components is often found in automated material handling systems. In such systems, pulleys can be used to lift and move heavy loads, while pneumatic actuators provide additional force to assist in lifting or controlling the movement of objects. This combination enhances efficiency and flexibility in various applications, such as conveyor systems or robotic arms.


What is a mono stable pneumatic valve?

A monostable pneumatic valve is a type of valve that has a single stable state and returns to that state when not actuated. It typically requires an external force, such as air pressure, to change its position, and once the force is removed, the valve automatically returns to its default position. This design is commonly used in applications where a simple on/off control is needed, allowing for efficient control of pneumatic systems. Monostable valves are often found in automation and process control systems.


Devices and machines that use fluids?

Devices and machines that use fluids include hydraulic systems, such as excavators and car brakes, which rely on pressurized liquids to transmit force. Pneumatic systems, like air compressors and spray guns, utilize compressed gases for operation. Additionally, fluidic devices, such as valves and pumps, manage the flow of liquids and gases in various applications, from industrial processes to everyday appliances. These systems leverage the properties of fluids to perform work efficiently and effectively.

Related Questions

How do you to select a pneumatic hammer which can give 25 g force?

It depends on air pressure in the pneumatic system. You pneumatic systems for high and low air pressure to force change. This is the compressor power.


What is a downward force of this machine pushes objects apart?

The machine is most likely using pneumatic or hydraulic pressure to push objects apart. Pneumatic systems use air pressure, while hydraulic systems use fluid pressure to create a downward force that separates objects. The force generated by these systems can be controlled and adjusted as needed for different applications.


What property of gases is a pneumatic system is based?

A pneumatic system is based on the property of gases to compress and expand easily when pressure is applied or released. This property allows pneumatic systems to use air or other gases to transmit force and energy to operate various mechanisms and components.


Why are train doors operated with pneumatics?

Pneumatics have the advantage over Hydraulics in that they are clean, require lower maintenance and respond quicker. When the application does not require that much force, pneumatics will do the job. Furthermore: the force needed for train doors should not be that large. It should only open and close the doors but not crush people that manage to get stuck in between


Is a pneumatic device operated by the force of a liquid?

No, a pneumatic device is operated by the force of compressed air.


What is hydraulic lifts?

Hydraulic lifts utilize a hydraulic piston or ram, typically oil filled, to supply the lifting force for raising or lowering an object/load. These hydraulic systems are usually subdivided by the initial force that drives the hydraulic pump which supplies pressure for the piston. Air/Hydraulics (air over hydraulics) and Electric/Hydraulics (electric over hydraulics) are the two most popular types of power supplies for hydraulic driven systems. Cables and pulleys are often incorporated in hydraulic systems to provide equalization between multiple hydraulic cylinders that must work in unison and to remotely transfer the lifting force to areas where a large cylinder would be impractical to locate.


Hydraulics use what kind of force?

Hydraulics use the force generated by the pressure of a fluid, usually oil or water, to transmit power and operate machinery. This force is harnessed to control and move components within a hydraulic system, making it a fundamental principle in various applications such as construction equipment, automotive systems, and aircraft controls.


How do gases help pneumatic systems do work?

Gases in pneumatic systems serve as a compressible medium that can transmit force and energy. When air or another gas is compressed, it stores potential energy, which can be released to perform work, such as moving pistons or actuating tools. The ability of gases to quickly expand and contract allows for rapid movement and precise control in various applications. Additionally, the use of gases makes pneumatic systems lightweight and efficient compared to hydraulic systems.


What mechanical system uses a pulley and a pneumatic?

A mechanical system that uses both a pulley and pneumatic components is often found in automated material handling systems. In such systems, pulleys can be used to lift and move heavy loads, while pneumatic actuators provide additional force to assist in lifting or controlling the movement of objects. This combination enhances efficiency and flexibility in various applications, such as conveyor systems or robotic arms.


What is a mono stable pneumatic valve?

A monostable pneumatic valve is a type of valve that has a single stable state and returns to that state when not actuated. It typically requires an external force, such as air pressure, to change its position, and once the force is removed, the valve automatically returns to its default position. This design is commonly used in applications where a simple on/off control is needed, allowing for efficient control of pneumatic systems. Monostable valves are often found in automation and process control systems.


Why were hydraulics put on cars?

Hydraulic power will multiply you. You press down on the brake pedal force and speed of heavy vehicles to easily stop. A hydraulic brake system in your car is simple.


What are a hydraulic system's uses?

An hydraulic systems uses are to multiply the "effort force" or the force that person is applying to the simple machine