0
What else can I help you with?
What is the actual thickness of 24 gauge metal?
For ferrous sheets, gauge 24 ------> 0.607 mm For non-ferrous sheets, gauge 24 ------> 0.511 mm Source: Table A-28 (Shigley's Mechanical Engineering Design, Special Indian Edition. Richard G. Budynas, J. Keith Nisbett. 9th edition)
What is MCR of boilers?
MCR: Steam boilers rated output is also usually defined as MCR (Maximum Continuous Rating). This is the maximum evaporation rate that can be sustained for 24 hours and may be less than a shorter duration maximum rating
What welding rods would you use to weld en24 and would you need to pre heat the steel?
Well, when it comes to welding EN24 steel, you'll want to use a welding rod that matches its strength and composition, like an E11018 electrode. Pre-heating the steel can help reduce the risk of cracking and improve the overall weld quality, especially for thicker sections. Just remember, take your time, breathe, and trust in your skills - you've got this!
A ton of refrigeration is equal to?
its the refrigeration's capibilty to move heat to a place that makes little or no difference. It equals up to 288,000 Btu/ per 24 hour period. Also you need 1 ton of refrigerant capacity per 600 square foot of a house. hope that helps
How long is the causeway bridge?
24 miles it is the longest bridge over water in the world
What is better 24 gauge steel garage door or 25 gauge steel garage door?
The lower the gauge number, the thicker the steel.
What is better - 24 gauge steel garage door or 25 gauge steel garage door?
The lower the gauge number, the thicker the steel.
Is the 12 gauge stronger than a 24 gauge shotgun?
All else being equal, yes.
What wire gauge used for headphones?
The wire gauge in thin headphone cables is quite small. I have read of people rewiring their headphones using 12 Gauge wire. There are commercial cables that use 11 gauge. The thicker the wire the less the resistance up to a point. Many headphones use 22 or 24 gauge and it seems to work OK.
Is 18 inches greater or less than 2ft?
less than 18 inches 2 feet = 24 inches so 18 inches is less than 24 inches
What is the percent increase of 18 to 24?
24 is 33 and 1/3 percent more than 18.
How are wires measured?
Wiring is measured in AWG (American Wire Gauge) in North America.Sometimes it's designated with the number sign in front, such as14 gauge or #14 wire.The smaller gauge numbers, mean larger diameter wire. So #10 wire is thicker (and can carry more current) than #18.From The Home Depot Wiring 1-2-3 book, here are some typical gauges used in homes:For copper wiring: 10 gauge wire is rated for 30 amps, 12 gauge rated for 20 amps & 14 gauge wire rated for 15 amps.A wire going to a small appliance many times is 18 gauge. Telephone wire is smaller (I think 24 gauge).
Is Chris Brown older than Ciara?
No he is not because he is 18 and she is like 24 No he is not because he is 18 and she is like 24
What are the release dates for Sanford and Son - 1972 Blood Is Thicker Than Junk 2-10?
Sanford and Son - 1972 Blood Is Thicker Than Junk 2-10 was released on: USA: 24 November 1972
Six less than four times a number is 18?
6 x 4 = 24 24 - 6 = 18
What is the relative value of a 24 gauge double barreled shotgun Belgium?
Relative to what? To an interested collector, a 24 gauge would be worth more than an identical gun in a larger (and more common) gauge. To someone who wanted it for hunting or target shooting, it would be worth less than one for which ammunition is readily available.
What are the release dates for The Amazing Mr- Malone - 1951 Blood Is Thicker Than Water 1-1?
The Amazing Mr- Malone - 1951 Blood Is Thicker Than Water 1-1 was released on: USA: 24 September 1951
