0
What else can I help you with?
Is Modulus of rupture the same as Maximum stress?
Yes.Modulus of RuptureUltimate strength determined in a flexure or torsion test. In a flexure test, modulus of rupture in bending is the maximum fiber stress at failure. In a torsion test, modulus of rupture in torsion is the maximum shear stress in the extreme fiber of a circular member at failure. Alternate terms are flexural strength and torsional strength.
What is Stiffness of a helical spring?
a helical spring has N turns of coil of diameter D, and a second spring made of same material and of same wire diameter has N/2 turns of coil of diameter 2D. if stiffness of first spring is k, then stiffness of second spring is
What happens to strain as stress increases?
it also increases in the same proportion as stress. Stress equals strain times a constant, where the constant is Young's modulus. This is Hooke's Law
What is difference between bar and rod?
ROD is used for axial loading and torsion, but BAR can be used for axial, torsion as well as bending loads....
Why I-section beam is preferred for heavy loading?
Cross sectional shape I, giving many benefits. It is very good for giving stiffness(less deformation on loading) and to withstand higher bending moments(as a result of heavy loading) on comparison with other cross-sectional shapes of same area. Also, it is very easy to manufacture. It will have more moment of inertia due to the distance of the flange from the centroidal axis and it have zeron eccentricity about one axis and the centrer of gravity lies inside the web.
Is bending stress is directly proportional to section modulus?
Yes, bending stress is directly proportional to the section modulus. A larger section modulus indicates that the cross-sectional shape of the member is better at resisting bending, leading to lower bending stress. Conversely, a smaller section modulus results in higher bending stress for the same applied bending moment.
Is tensile modulus the same as young's modulus?
Yes, indeed. Sometimes tensile modulus is different from flexural modulus, especially for composites. But tensile modulus and elastic modulus and Young's modulus are equivalent terms.
Is Modulus of rupture the same as Maximum stress?
Yes.Modulus of RuptureUltimate strength determined in a flexure or torsion test. In a flexure test, modulus of rupture in bending is the maximum fiber stress at failure. In a torsion test, modulus of rupture in torsion is the maximum shear stress in the extreme fiber of a circular member at failure. Alternate terms are flexural strength and torsional strength.
What is the difference between Young's Modulus and Modulus of Elasticity, and how do they compare in terms of measuring a material's stiffness?
Young's Modulus and Modulus of Elasticity are both measures of a material's stiffness, but they are not the same. Young's Modulus specifically refers to the ratio of stress to strain in a material under tension or compression, while Modulus of Elasticity is a more general term that can refer to the stiffness of a material under various types of stress. In terms of measuring a material's stiffness, both Young's Modulus and Modulus of Elasticity provide valuable information. Young's Modulus is often used for materials that are linearly elastic, meaning they deform proportionally to the applied stress. Modulus of Elasticity, on the other hand, can be used for a wider range of materials and loading conditions. Overall, both measures are important for understanding a material's stiffness, but the choice of which to use may depend on the specific properties of the material and the type of stress it will be subjected to.
Is ultimate flexural strength and moment of resistance the same in a reinforced section?
No the moment of resistance is a defining parameter that can be used to calculate the stress in a cross section of a given material that is subject to flexural loading. The ultimate flexural strength is a numerical value of stress at which the material will crack, tear, rip etc. Think about ultimate tensile strength and the value of Young's Modulus. Young's Modulus is not defined at the point of 'necking' and therefore the ultimate tensile strength cannot be computed from Young's Modulus and Hook's Law, but the UTS is an empirically defined value.
What is the difference between elastic modulus and Young's modulus, and how do they relate to each other in terms of material properties?
Elastic modulus and Young's modulus both measure a material's stiffness, but they are not the same. Young's modulus specifically measures a material's resistance to deformation under tension or compression, while elastic modulus is a more general term that can refer to various types of deformation. In terms of material properties, Young's modulus is a specific type of elastic modulus that is commonly used to characterize a material's stiffness.
What is the types of modulus of elasticity?
1. Young's modulus of elasticity, E, also called elastic modulus in tension 2. Flexural modulus, usually the same as the elastic modulus for uniform isotropic materials 3. Shear modulus, also known as modulus of rigidity, G ; G = E/2/(1 + u) for isotropic materials, where u = poisson ratio 4. Dynamic modulus 5. Storage modulus 6. Bulk modulus The first three are most commonly used; the last three are for more specialized use
What will be the young's modulus if i use two wires both made of copper but they are different in length and diameter?
Young's modulus or modulus of elasticity is a property of the material. As in both the wires we have copper material the young's modulus will be the same. It does not get altered with length or area of cross section.
Why is it not possible to obtain the modulus of elasticity in transverse bending by the same method used in a teension test?
In a tension test, the modulus of elasticity is measured along the longitudinal axis of the material, reflecting its resistance to deformation under tensile (pulling) forces. In transverse bending, the material is subjected to bending forces perpendicular to its longitudinal axis, causing a different type of deformation. The modulus of elasticity in transverse bending cannot be obtained by the same method because it involves a different mode of stress and deformation compared to tension tests.
What property do aluminium and titanium share?
Not much in common, but they do have teh same specific stiffness ( modulus to weight ratio) and both are non magnetic
Is flexural strength and cross breaking strength are same?
Flexural strength and cross-breaking strength are related but not identical concepts. Flexural strength refers to the maximum stress a material can withstand when subjected to bending before failure, typically measured in a three-point or four-point bending test. Cross-breaking strength, often used in the context of wood and similar materials, specifically denotes the strength of a material when subjected to a transverse load until it fractures. While both terms deal with bending stresses, they may be applied in different contexts and materials.
Is Young's Modulus the same as Modulus of Elasticity?
Yes, Young's Modulus is the same as Modulus of Elasticity.
