The CPKE24-1AB heat pump is typically rated at 2 tons of cooling capacity and has a Seasonal Energy Efficiency Ratio (SEER) of around 14. However, specifications can vary based on the manufacturer and model year, so it's always best to consult the product's technical documentation for precise details.
I just had a 15 SEER Ruud Heat Pump installed. It says, 'Made in Mexico' on back of unit.
To provide the tonnage and SEER rating for a specific Tempstar model, you'll need to specify the model number, as Tempstar offers a range of air conditioning units with varying specifications. Generally, Tempstar units can have tonnage ratings ranging from 1.5 to 5 tons and SEER ratings from 14 to 20+. It's best to check the product documentation or the Tempstar website for the exact model details.
The Rheem model RRGF-131075CKR is a 13 SEER (Seasonal Energy Efficiency Ratio) gas furnace and air conditioning unit that has a cooling capacity of approximately 2.5 tons. This tonnage is suitable for cooling spaces of around 1,200 to 1,500 square feet, depending on various factors such as insulation and climate. The unit is designed for efficiency and reliability in residential heating and cooling applications.
You can't match an air handler to an air handler. I assume you meant a 3.5 Ton A/H to a 4 Ton condenser. The answer is no. If the A/H was 4 Ton & you had a 3.5 Ton condenser you could with an expansion valve setup. You should really match equipment when possible & I highly recommend using a qualified technician.
It is recommended a four Tom air-conditioner is needed to cool a 3200 square foot home. The size of the air conditioner is dependent upon several different factors.
This is a straight cool 13 SEER condensing unit that uses R410a refrigerant. This is not a heat pump.
2 1/2 ton heat pump, I believe 12 seer.
5 ton heat pump, 12 SEER,most likely single stage.
I have a4 ton air handler and a three and a half ton condenser 13 seer goodman heat pump will my seer change
It is a 2.5 ton 13 seer heat pump unit. The G stands for Goodman, the S stands for split, H stands for heat pump. 13 designates the seer. 30 designates the tonnage of the unit. AC is the models revision.
it is a 12 seer 4 ton heat pump
mitsubishi
10 seer 36000 BTU, you can find info here (page 5) http://icpindexing.mqgroup.com/documents/086477/42841300108.pdf based on manufacturer MODEL NUMBER IDENTIFICATION GUIDE
GSH stands for goodman split heat pump 13 stands for 13 seer 24 stand for tonnage of unit AC is the revision of the unit
Heat pump efficiency can be expressed in SEER rating, with 13 being a mediocre heat pump. Infinity currently has the most efficient energy pump on the market, with a SEER rating of up to 20,5. American Standard, Comfortmaker and TempStart provide units with a 17+ SEER rating.
The Goodman heat pump model CPKE30-1B typically has a SEER (Seasonal Energy Efficiency Ratio) rating of around 14 to 15. SEER ratings indicate the cooling efficiency of the unit over a typical cooling season, with higher numbers reflecting better energy efficiency. It's always recommended to check the specific product documentation or the manufacturer's website for the most accurate and up-to-date information.
It is a Goodman 3.5 ton 13 seer Heat pump.