these are very noisy
they take a lot of space for transmitting power
Because the speed is decreased less from an equal gear ratio.
An idler gear is a gear which connects two other gears so they will turn in the same direction. :)
A major difference between lobe and gear pumps is that the rotors are designed to remain in close contact throughout rotation. By close contact, I mean that the lobes rotate about one another at extremely close tolerances. Also, unlike the gear pump, the rotors of the lobe pump do not mesh
The gears in a planetary gear system are the drive gear, ring gear, and planetary gear.
A bevel gear provides torque and rotation at 90 degrees, and a helical gear provides it at 180 degrees.
Positive, No chain or belt to break. Negative, Noisy.
It is to transfer the power between the driveshaft and the wheels. The drive shaft drives the pinion, the pinion drives the ring gear, the ring gear drives the axle(s) and the axle(s) drives the wheels.
Belt drives can be used when the distance between two shafts(for transmitting power) is large and are relatively cheaper than gear drives.
gear 3 That would be the drive gear, the gear that gear drives would be the driven gear.
The oil pump drive gear, which is driven by the camshaft, drives the distributor.The oil pump drive gear, which is driven by the camshaft, drives the distributor.
it can slip
Sprockets and chain, gear to gear and belt drive are three types.
The sprocket on the nose of the crankshaft that drives the cam sprocket.
They have a spiral spring,similar to a wind-up clock, and when released it drives a small gear, which in turn drives a larger gear, giving the wheels a suitible turning speed.
The belt is made or rubber and drives the cam. A gear is just that, a gear which is a metal or plastic part with teeth on it that meshes with a belt or another gear.
Some disadvantages of cheap flash drives include limited memory space, small size, lesser quality of endurance, and need special versions of operating systems to work.
ghanta nahi pata