answersLogoWhite

0

First of all, pay attention to what you are doing and what you are working with.

Always wear safety glasses or goggles when working with dangerous chemicals.

Know where the laboratory safety equipment is located.

Tell the instructor of any accidents immediately.

Keep food and drinks out of the laboratory work area.

When dealing with chemicals, always read labels carefully to be absolutely certain that you have the right chemical.

Sometimes you will be told to use a certain concentration of a solution. In those cases, be sure you check the label for concentration as well as the name of the chemical.

Never mix chemicals that you haven't been told to mix without an "okay" from the instructor.

If you spill a chemical, wipe it up immediately andadvise the instructor. Be sure to let the instructor know what you have spilled.

If you get any chemical on you, rinse it off immediately with lots of water and let the instructor know what you spilled on your way to rinsing it off.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

Who invented the wave-mechanical model?

Bartosz Kubinski from Poland invent mechanical waves at october 1999 y. by using slat of stealth scale. It is me ! greetings


How can you increase mechanical advantage of a gear system?

A mechanical advantage occurs when a tool such as a hammer is used that increases the amount of force being applied without increasing the effort of the person using the tool. To increase mechanical advantage, you could use a bigger hammer to increase output force.


What is the difference between Oil seal and mechanical Seal?

Oil seals and mechanical seals serve different purposes in sealing applications. An oil seal is designed to prevent the leakage of lubricants and contaminants in rotating machinery, typically using a flexible lip that contacts a shaft. In contrast, a mechanical seal is used to prevent fluid leakage in rotating equipment, such as pumps or mixers, by utilizing a combination of stationary and rotating components that create a tight seal under pressure. While oil seals primarily focus on sealing against oils and greases, mechanical seals are engineered for more demanding applications involving various fluids and pressures.


How do mechanical toys work?

Mechanical toys work by using a variety of electronic based on their intended function. Most use batteries though some now use solar power.


What is mechanical control Definition please?

Mechanical control can be defined as a technique of managing pests using physical means such as screen barriers, fences, weeding, temperature control, or removal by hand.

Related Questions

What are the health and safety procedures for using different types of equipment?

The health and safety procedures for using any equipment is whatever the manufacturer has specified in labels and user manuals.


What are the approved procedures for using safety equipment?

Approved procedures for use of any equipment, safety or otherwise, differ from workplace to workplace and are also different for different kinds of equipment. You must learn the procedures of you specific location and equipment by reading instructions, attending a training class, or receiving instruction from your supervisor or another designated person.


What are the main causes of welding accidents?

The main causes of accidents using welding equipment is lack of care during safety procedures. It is important when dealing with dangerous equipment to also follow the correct safety steps.


What are the standard operating procedure in handling the equipment?

The Stanard Operating Procedures or SOP's are how to operate safely and effectively the equipment on site. There should also be a section for what to do in an emergency, how to shut down to prevent mechanical meltdown. Before using this equipment you should have to sign off that you have read the SOP and are familiar with it.


What is a reason for using the personal protective equipment?

safety.


What safety measures should be implemented when using a silo elevator?

When using a silo elevator, important safety measures include proper training for operators, regular maintenance of equipment, wearing appropriate protective gear, following all safety guidelines and procedures, and ensuring that the elevator is used within its specified capacity limits.


What equipment if any are you prohibited from using in health and safety?

There are no universal prohibitions on the use of equipment for health and safety. Some equipment will be forbidden in certain situations but not in others.


Is it true or false that It is okay to use welding equipment you have no training with when it is similar to equipment you already use?

False. Using welding equipment without proper training can be dangerous, even if it seems similar to equipment you are familiar with. Different welding processes and equipment can have unique safety protocols and operational procedures that must be understood to prevent accidents and ensure effective results. Always seek appropriate training before using unfamiliar equipment.


How do you fix a radio in a 97 bmw528i?

-- Using appropriate test equipment and logical test procedures, identify the component, section, or connection that has failed. -- Using suitable mechanical and electronic tools and materials as required, repair or replace the faulty connection, component, or section of the radio.


What safety measures can be implemented to prevent death by falling from height"?

Safety measures to prevent death from falling from height include using proper fall protection equipment such as harnesses and guardrails, providing training on safe work practices, conducting regular inspections of equipment and work areas, and implementing procedures for working at heights.


How can one effectively prevent accidents from occurring?

One can effectively prevent accidents by being aware of their surroundings, following safety guidelines and procedures, using proper equipment, and staying focused on the task at hand.


How can you reduce or avoid danger when you utilize these potentially dangerous?

To reduce or avoid danger when using potentially dangerous equipment or materials, follow all safety guidelines and procedures, wear appropriate safety gear, receive proper training on how to use the equipment safely, and regularly inspect and maintain the equipment for any issues. Additionally, always be aware of your surroundings and potential hazards to prevent accidents.