i want all ASME codes and standards.
What is difference between ASME B16 & ASME B16.5 Flange
Yes - Cold bending is allowed by ASME B31.3. The requirements are detailed in Section 332. Generally the most difficult aspect of cold bending to ASME B31.3 standards is the requirement that the pipe not exceed 8% of the outside nominal diameter for internal pressure and 3% for external pressure. Thin wall tube and pipe generally require a mandrel bend.
The ASME U stamp designates an unfired pressure vessel of more than 35 gallons (4.68 cu. ft.) has been built to ASME Code specifications, under ASME Code section 8. A U-1 form must be filed and signed by the authorized inspector for each and every pressure vessel built. The ASME U2 stamp is for unfired pressure vessels not built to ASME section 8 div. 1 standards, but under the alternative rules, has been inspected and found to comply with acceptable construction methods. A U-1 form signed by an authorized inspector must be filed for each such vessel, along with a description of the methods of construction used. The ASME U3 stamp is for high pressure (over 600 psi?) unfired pressure vessels. The ASME UM stamp is for pressure vessels less than 35 gallons capacity.
It's an old (pre-1962) grade of Carbon Steel, replaced by A 515 / A 516 in 1962
i want all ASME codes and standards.
OSHA has the legal authority to enforce only those standards it issues. It has no authority to enforce ASME Standards, unless they have been incorporated by reference in a Standard issued by OSHA.
ASME having standards from A to Z .Y is the standard series for design series.
asme
"Society ASME." ASME = American Society of Mechanical Engineers The mark is to identify the approving standards body.
ANSI = American National Standards Institute ASME - American Society of Mechanical Engineers ANSI is mainly a standards-keeping institution. ASME issues standards, but has other activities also (they publish a magazine, for instance).
Is there an equivalent to SA 212 Grade B
The Indian Standards are not available for free download.
Is there an equivalent to SA 212 Grade B
Simply, A105 is an ASTM standard for a ratedsteel where SA105 is the ASME standard for (nominally the same) rated steel. Basically, they are the same, although SA105 has additional applications beyond A105 according to ASME standards.
ASME was created in 1880.
What is difference between ASME B16 & ASME B16.5 Flange