0
What else can I help you with?
What tool could be used to cut an exhaust pipe?
hacksaw
If you use a hacksaw to cut a piece of metal why do they both become hot?
due to heat generated by friction of two metallic surfaces
Which tool is the best for cutting big metal rods?
The metal rods are more hard, so to make a cut is not easy with the hand tools. We can use the best of the above: You may need to cut a metal rod for a host of applications, and general tools may not do the trick. The consistent method is with a metal hacksaw. Cutting a rod is a good way to learn how to work with metal. The cutting method should work with minor modifications for other metals. >> Mark the rod >> lock rod >> spray some lubricant >> start pushing and pulling your hacksaw >> finished Using this angle grinder is by far the best tool for cutting any kind of all-thread. It's has some easy steps to make a cut. >> Place a mark on the rod >> Lock rod >> Fix the disc in the machine >> Starts machine and make a cut >> Finished Using hacksaw it takes time for making the cut, but on the other hand it is an economic tool as the cost of cutting is low as compared to machined. Angle grinder can reduce your effort while making cuts. It will cut faster than hacksaw but the cost of cut is more than a hacksaw. So, As per me for cutting big hard metal rods one should use grinder machine. for more visit Bipico Industry
This part of the screwdriver acqts as a wheel to do the work?
The handle acts like that.
What is a damper in ac terminology?
A damper is usually a piece of metal that is installed in a duct to allow the airflow to be restricted. This lets the user open or close the restriction to adjust the amount of air getting through. There is often a metal tab handle outside the duct to rotate the damper inside the duct. The handle is parallel to the restriction plate, so the least resistance is when the handle is parallel to the duct itself. To restrict the airflow, turn the handle so that it is up to 90 degrees off from the direction of the duct.
HOW TO UTILIZE HACKSAW?
A hacksaw is a hardened, toothed blade, fixed into a metal frame that has a handle. The hacksaw is used to cut through metal.
What are the parts of the hacksaw and its uses?
Blade frame, nuts, handle.........
What are the parts of hacksaw?
The handle, the bow and the blade.
What is a little saw?
A little saw may be a number of things. -I have a 6" hacksaw, a keyhole saw and half of a regular hacksaw blade in a special handle. I think they all qualify as 'little saws'
What is the difference between a junior hacksaw and a hacksaw?
The hacksaw is bigger than the junior hacksaw
What is the proper manner in which a hacksaw blade should be inserted on a hacksaw frame?
The teeth should point forward, as is the case with most saws.
Who is inventor of hacksaw?
who is inventor of hacksaw
How long will it take to cut toilet tank bolt with hacksaw?
That depends on you, the hacksaw and your patience. You will probably have to use just the blade without the handle to be able to get to the bolt. It should be brass which cuts fairly easily. 1-2 minutes should be enough.
What is hack saw?
A hacksaw is a hand tool used for cutting metal. It is composed of a frame with a handle and a removable blade with very fine teeth.
What is hacksaw frame?
A hacksaw frame is a tool used to hold a hacksaw blade in tension for cutting materials like metal and plastic. It typically consists of a U-shaped frame with a handle on one end and a blade holder on the other, allowing for easy blade replacement. The tensioning mechanism ensures that the blade remains taut while cutting, improving efficiency and precision. Hacksaw frames come in various sizes to accommodate different blade lengths and cutting applications.
What is the recommended way to install the hacksaw blade into the saw's frame?
Most blades anymore are marked which end goes towards the handle. If not, the points on the teeth should point away from the handle so that they cut on the forward stroke.
When was the hacksaw invented?
No one knows the Hacksaw is an ancient tool
