0
What does the mechanical advantage of a first-class lever depend upon?
Wiki User
∙ 11y ago
Wiki User
∙ 13y ago
Wiki User
∙ 11y agoIt depends upon where the fulcrum is, and it can be changed by moving the fulcrum.
Add your answer:
Earn +20 pts
Which type of lever always increases mechanical advantage?
second class lever
What are the two types of mechanical advantage?
Those dependent on the vector resolution of forces (inclined plane, wedge, screw) and those in which there is an equilibrium of torques (lever, pulley, wheel).
How does a greater mechanical advantage benefit a machine?
Lever: A lever consists of a rigid bar (the lever arm) that pivots around a fixed point called the fulcrum. By applying a force at one end of the lever, you can lift or move a load at the other end. Depending on the positions of the force and load relative to the fulcrum, levers can amplify force or distance. Pulley: A pulley is a wheel with a groove that holds a rope, cable, or belt. When you pull on one end of the rope, it moves the load attached to the other end. Fixed and movable pulleys can change the direction of force or provide a mechanical advantage, making it easier to lift heavy objects. Wheel and Axle: A wheel and axle consist of a larger wheel connected to a smaller axle. When force is applied to the wheel, it generates rotational motion that can be used to move loads. The mechanical advantage depends on the ratio of the wheel's radius to the axle's radius. Inclined Plane: An inclined plane is a flat surface that is sloped. By sliding an object along the inclined plane, you can exert a smaller force over a longer distance to move the object to a higher or lower elevation. This reduces the force required to lift the object vertically. Wedge: A wedge is a double-inclined plane used to split or separate objects. When you apply force to the thick end of the wedge, it generates a large force at the thin end, making it useful for cutting, splitting, or prying. Screw: A screw is an inclined plane wrapped around a cylindrical shaft. When you rotate the screw, it moves along its threads and can lift or hold objects. Screws provide both a mechanical advantage and a way to generate motion over a distance.
What are simple macines?
Simple machines are basic devices or mechanical powers on which other machines are based (eg, lever, wedge, pulley, wheel and axle, inclined plane, screw).
How does hydraulic pressure create a mechanical advantage in a simple hydraulic jack?
to understand this answer we have to assume the following as givin fact. fluids do not compress, that out of the way, the hydraulic piston you push is a smaller diameter than the piston that does the work. for example lets say that you are using a 1 square inch piston as the one you are pressing, and you are using a 100 square inch piston as the one doing work. these numbers are greatly exaggerated but will work for the example if you put 10 pounds of pressure on the 1 inch cylinder, you will have 10 psi of pressure. when this is routed to the 100 square inch cylinder you will still have 10 psi of pressure, but now it is acting on 100 square inches (10 pounds per square inch times 100 square inches) this would calculate to 1000 pounds. it would be the same as a 1001 inch lever with the fulcrum being 1 inch in from one end, only you would exert force on the larger lever to gain a mechanical advantage. hydraulics used in this way are known as liquid levers
What is the mechanical advantage of a lever?
The mechanical advantage is when the fulcrum is closer to the effort and creates a advantage
What does the mechanical advantage of first class lever depend upon?
It depends upon where the fulcrum is, and it can be changed by moving the fulcrum.
What does the mechanical advantage of a first class lever depend upon?
It depends upon where the fulcrum is, and it can be changed by moving the fulcrum.
What does mechanical advantage of a first class lever depend upon?
It depends upon where the fulcrum is, and it can be changed by moving the fulcrum.
What is the Mechanical Advantage of levers?
The mechanical advantage of the lever is that smaller persons can move heavier objects. The lever can be placed under the object and the person can then push down on the lever.
How do you increase the mechanical advantage of a lever?
The mechanical advantage of a lever can be increased by moving the fulcrum towards the load and away from the power end.
What is an example of a mechanical advantage?
Crowbar (lever) .
What is a lever with a mechanical advantage greater than one used to do?
Mechanical advantage refers to the ratio of the force produced by a machine to the force applied to it. A lever with a mechanical advantage greater than one is used to increase distance.
Which type of lever always increases mechanical advantage?
second class lever
How do you get mechanical advantage?
by using a pulley, lever or gear
What is the IMA of lever?
the IMA is the ideal mechanical advantage.
How is the mechanical advantage of a lever determined?
The 'ideal' mechanical advantage is length of the effort arm/length of the load arm .
