2.10mm thk
20 gauge is equel to 0.8mm
The unit weight of corrugated galvanized iron (GI) sheets varies depending on the gauge and size. Typically, the weight ranges from about 4.0 kg/m² for 0.4 mm thickness to approximately 7.5 kg/m² for 1.2 mm thickness. For precise calculations, it's essential to refer to specific manufacturer specifications, as the weight can also vary based on the coating and profile of the sheet.
what is the thickness of 24 swg Galvanised iron sheet
friend use formula weight of iron sheet = l*b*t* 7.85 where; l => lenght of the sheet b => breadth of the sheet t +> thickness of sheet and 7.85 is taking as constt.
To calculate the weight of a GI sheet, you need to know its length, width, and thickness, as well as the density of the material (galvanized iron). The weight can be calculated using the formula: Weight = Length x Width x Thickness x Density of GI sheet. The density of galvanized iron typically ranges from 7850 to 8050 kg/m³.
To calculate the weight of the GI sheet per square meter, you need to know the area of the sheet. If you have a 22 g GI sheet, you need to divide the weight (22 g) by the area in square meters. So, if the area of the sheet is 1 square meter, the weight per square meter would be 22 g.
It is simple ! = length in meters *width in meters *thickness in mm*density of the material (i.e 8.1 in this case )
It depends on the thickness of the sheet which usually comes in between 0.1 to 1 mm thickness. For the same area, the later one is 10 times more heavier than the former one. Now consider a sheet with 0.63mm thickness. As the density of the steel is 8, the weight of sheet would be 8*0.63=5.04 kg/sq. meter
The length of wire in 1 kilogram of GI (galvanized iron) tie wire can vary based on the wire's gauge (thickness). Generally, for a standard gauge of around 16, 1 kilogram of GI tie wire can yield approximately 50 to 100 meters, depending on the specific density and gauge of the wire. To get an accurate measurement, it's best to check the manufacturer's specifications for the particular wire you are using.
Approximate Weight per Square Metre of Sheet (for 120 Gsm Coating) APPROXIMATE WEIGHT 7.45 Kg PER SQUARE METRE
The difference between the GI sheet galvanized and mild sheet steel is the gauged used. The other difference is the materials used and the galvanization aspect.
ac sheets are asbestos cement sheets and gi sheets are galvanized iron sheets.