Drawings with specifications are available on the web from BVR Electrical Systems. A link is provided. (Scroll down.)
ASTM A615 is the Standard Specification for Deformed and Plain Carbon-Steel Bars, the equivalent in German standards are DIN 17100 & DIN 488.
DIN standard ST 37-2 Structural steel
CK22 is the equivalent DIN grade for EN3A
After original version of norm DIN 1544 with German text, this describes cold rolled steel strip out of "1.0330" steel, which is low-alloyed steel after another DIN norm (DIN 1624). P. Vanel
DIN 16 : max working Pressure is 16 bar Class 150 : max working pressure 21 bar
double din or din 2
DIN refers to a standardized radio/stereo size for vehicles (large enough to accept a CD). 1 DIN is the standard DIN specification. 2 DIN or double DIN refers to units that are twice as high as the standard DIN, half DIN is half high as 1 DIN. International standard ISO 7736 defines a standard size for car audio head units. The standard was originally established by the German standards body Deutsches Institut fur Normung (The German to English translation is: "German Institute for Standardization"), and is therefore commonly referred to as the "DIN car radio size". It was adopted as an international standard in 1984. Head units generally come in either single DIN (1 DIN), which is 50 mm high; or double DIN (2 DIN), which is 100 mm high. In skiing DIN refers to the setting of the binding i.e. which torque that is needed to make the ski boot come loose from the binding. The abbreviation comes from the same German institute as described above.
DIN refers to a standardized radio/stereo size for vehicles (large enough to accept a CD). The size is 2" high by 7" wide. 2 DIN or double DIN refers to units that are twice as high as the standard DIN, and so 1 DIN would be the standard DIN specification.Here is a link to a detailed description: http://www.installdr.com/TechDocs/999006.pdf DIN refers to a standardized radio/stereo size for vehicles (large enough to accept a CD). 1 DIN is the standard DIN specification. 2 DIN or double DIN refers to units that are twice as high as the standard DIN, half DIN is half high as 1 DIN.International standard ISO 7736 defines a standard size for car audio head units. The standard was originally established by the German standards body Deutsches Institut fur Normung, and is therefore commonly referred to as the "DIN car radio size". It was adopted as an international standard in 1984.Head units generally come in either single DIN (1 DIN), which is 50 mm high; or double DIN (2 DIN), which is 100 mm high. For more information, you can refer to http://www.eonon.com/HelpShow.aspx?id=9&cid=7&hname=Basic%20Knowledge#115&utm_source=wiki.answers.com&utm_medium=answer&utm_campaign=answer
A 2 din mp3 player is a in dash stereo unit for a car/truck, din is the standard that most automakers use for their stereo head units 2 din or double din is a unit whose dimensions are approximately 7" x 4" whereas a standard din is 7" x 2".
DIN TOOL is a EU standard for tools. Also, it is a name of Chinese tool supplier: DIN TOOLS : www.din-tools.com
Sure you can. DIN refers to a standardized radio/stereo size for vehicles (large enough to accept a CD). 1 DIN is the standard DIN specification. 2 DIN or double DIN refers to units that are twice as high as the standard DIN, half DIN is half high as 1 DIN. Check the player position height of your car carefully. If 50mm, you should get 1 Din Car stereo, and if 100mm, you should get 2 Din stereo. You can buy great 2 din stereo from Eonon.http://www.eonon.com/2-Din-DVD-Player.html?utm_source=wiki.answers.com&utm_medium=answer&utm_campaign=answer
"DIN" is an industry standard for head unit size (ie, the radio/CD player that's mounted in the dash). The DIN standard is for a radio that's 7" wide and 2" tall. A 2 DIN is two DIN units stacked, or a single unit that's the same size as two DIN units. That means 4" tall and 7" wide.
AISI 304/304L -DIN 1.4301/1.4306-1.4307 so 304 equv. DIN 1.4301 304L equv DIN 1.4306-1.4307
ASTM A615 is the Standard Specification for Deformed and Plain Carbon-Steel Bars, the equivalent in German standards are DIN 17100 & DIN 488.
DIN EN 10130 (published in Feb 2007 - replaced DIN 1623) BS 1449 is its "BS" equivalent!
standard DIN 17103 TstE 355 stand for what material and what is the alternate material in ASTM atandard
Its metric pipe, can also be thread male or female, din 65 is real close to 2.5" standard