Cooling Load is the amount of energy that is to be extracted from a house to develop a conditioned environment. There are two types of cooling loads i.e, sensible cooling load and latent cooling load....
Heating Load is the amount of heat that is to be supplied to a house in order to increase its temperature to maintain desired temperature...
A heating system usually brings heat into a space and a cooling system would remove heat from that space.
The difference between static load testing and dynamic load testing is that with static load testing a certain percentage of a product is tested against a group of specifications. During dynamic testing each individual product is tested against a group of standards based on previous tests.
Buckling Load: It is the highest load at which the column will buckle. Crippling Load: It is the max load beyond that load, it cant use further it becpomes disable to use. The buckling Load < The Crippling Load Safety load= Crippling Load/ Factor of safety
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
Cooling load in kw is increase the temperature of the water before enter the cooling tower, thus the differential heat energy level is high compare to surrounding temp., so it will transfer heat more to surrounding and leave the tower with low temperature, and it will become more like to approach the wet bulb temp., this happens if the variables such the water flow, and the air velocity is kept constant.
A dynamic load arises from the acceleration or deceleration of a "static" load (mass). A shock load occurs when this acceleration or deceleration is very large and the the time frame is very short.
Cooling energy depends on the efficiency of cooling device used but cooling load depends on many factors such as the volume of the room, comfort band, fabrics used, geographical and climatic properties of location that the room is built. In simple terms, for a room with a specific cooling load different devices can be used. Since, each device has different efficiency, therefore different amounts of cooling energy may be obtained.
nada
nada
nada
no difference
land
sudden load differ from impact load by the velocity of loading
The difference between barrel and gallen is that a barrel can load 220 litre oil and a gallon can load millions of oil.
what difference between residential and commercial load calculations
buckle means bending
About 48,000 BTU You need to have load calculations done. Insulation, windows, location, outside temps, shade conditions, etc. will all affect the answer. For a shop with no windows and very good insulation or in a moderate climate, 48,000 btu may be sufficient. There are heating and cooling load worksheets available on the web if you know the R-value of your insulation and window type.
chickjenww