Recrystallisation temperature is the temperature at which the crystal structure starts forming.
Saturation temperature of steam is the Temperature at whihc any addition of heat does not increase the temperature of the water but produces steam.It depends upon the pressue and for every pressure there is a saturation temperature.
Temperature monitoring refers to the process of observing an recording temperature over a specific period. This is commonly done using the temperature data logger.
Bulk temperature refers to the average temperature of a fluid within a system, calculated by taking into account the temperature distribution across the system. Mean film temperature, on the other hand, is the average temperature of a fluid film that is in contact with a solid surface, often used in heat transfer calculations. It is calculated by considering the temperatures at the inlet and outlet of the fluid film and accounting for any temperature variations along the surface.
The mould temperature of epoxy resin is very much dependant on the type of epoxy.. some resins cure at ambient temperature, some have to be cured at temperatures up to 180ºC/350F. This should be on the product documentation. Generally, the higher the cure temperature, the higher service temperature is allowed.
Cooling approach temperature refers to the difference between the temperature of the cooling medium (such as water or air) and the temperature of the fluid being cooled. It is a critical parameter in heat exchangers and cooling systems, indicating the effectiveness of the cooling process. A smaller approach temperature signifies better heat transfer efficiency, while a larger approach temperature may indicate reduced performance or the need for system optimization.
Different aspects of temperature that can be measured include ambient temperature (air temperature in the surrounding environment), surface temperature (temperature of an object's surface), body temperature (temperature of a living organism), and water temperature (temperature of water in a body of water).
The temperature is 13.
Change in temperature = New temperature minus Old temperature.
The water temperature can be different from the air temperature.
Some common types of temperature recorded include: ambient temperature (air temperature of surrounding environment), surface temperature (temperature of an object's exterior), body temperature (core temperature of a living organism), and liquid temperature (temperature of a liquid substance).
a temperature line is a line of temperature
To determine the change in temperature, you can subtract the initial temperature from the final temperature. This will give you the difference in temperature, showing how much the temperature has changed.
Indoor temperature is the temperature indoors.
Core temperature refers to the internal temperature of the body, typically measured in areas like the rectum or the esophagus. Shell temperature, on the other hand, refers to the temperature of the skin on the body's surface. Core temperature reflects the body's overall internal temperature, while shell temperature can be influenced by external factors like clothing or the environment.
High temperature=low viscosityLow temperature=high viscosity
the net stack temperature is determined by substructing the ambient temperature ( around the furnace) from the stacke temperature (vent temperature)
If the ignition temperature is lower than the room temperature, the substance will not ignite or burn spontaneously at room temperature. Ignition temperature refers to the minimum temperature required for a substance to ignite and sustain combustion, so if it is lower than the room temperature, the substance will remain stable at that temperature.