answersLogoWhite

0

The selection criteria for relief valves is based on a number of factors. Some of them include size, design and the operating characteristics among others.Ê

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

What is Difference between relief valve and safety valve?

Relief valve always position in the suction line in oreder to relief the extra pressure, while safety valve is always placed at discharge line to release excess pressure.I would take that one step further by stating that a " RELIEF VALVE" is one that is "meant" to be lifted off its seat, as opposed to a "SAFETY RELIEF VALVE" which is not!DIFFERENCE BETWEEN RELIEF VALVE AND SAFETY VALVE:1. Releif valve is applicable in the fluid system.safety valve is applicable in the gaseous system.2.Relief valve opening is directly proportional to the pressure rise.Safety valve opening is will happen at after reaching the setpressure.3.Mode of relif vlave line is again connected to the suction.But in the safety valve is just vent-out there is no connection tosuction.


What is huddling chamber in a safety valve?

Part I-Sizing and Selection Downstream Segment API STANDARD 520 EIGHTH EDITION, DECEMBER 2008 huddling chamber: An annular chamber located downstream of the seat of a pressure relief valve for the purpose of assisting the valve to achieve lift.


What is the purpose of geyser pressure valve?

The purpose of a pressure relief valve in a geyser is to release the pressure created inside due to evaporation of water.


Functions of relief valves in fluid power control systems?

Fluid power comes in two forms: hydraulic and pneumatic. The pump in an hydraulic system is a flow source, delivering a set amount of fluid every revolution. Pressure is an effect due to restriction on flow in the circuit. If the oil delivered by the pump is used to operate a cylinder, the pressure that develops is due to load on the piston. If the pressure required to move the load on the cylinder is greater than the setting of the relief valve, the piston will not move and all the oil will pass through the relief valve. Also, when the piston has moved to the end of the stroke, it cannot move any further, however the oil delivered by the pump goes over the relief valve. If there wasn't a relief valve, the pressure will build up until the oil from the pump can flow somewhere: by bursting a hose or breaking the pump or cylinder.


Difference between set pressure and blow-off pressure?

The set pressure is the pressure at which a relief valve starts to open. When the valve is open and relieving, the pressure will be higher or lower than the set pressure, depending on the system and the valve design. That is the blow-off pressure.

Related Questions

How to answer supports strategic direction on selection criteria?

supports strategic direction on selection criteria?


Is the temperature relief valve leaking in your system?

Is the temperature relief valve leaking in your system?


Location of Oil pressure relief valve on Wrangler?

The relief valve is part of the oil pump.


What is difference between pressure reducing valve and pressure relief valve?

pressure relief valve relief the excess pressure which is developed in the syatem, while pressure reducing valve reduces the pressure and supply it to the system.


What is a tell tale on a relief valve?

A tell tale on a relief valve is a small opening or connection that allows excess fluid to escape when the relief valve opens. It is used to visually indicate when the relief valve is relieving pressure and discharging fluid. Tell tales are important for monitoring the performance and functionality of relief valves in a system.


Where is the oil pressure relief valve on an LS2?

The high oil pressure relief valve is located in the oil pump


What does converter relief valve do?

Converter relief valve ensures high line pressure does not flood/overrun the solenoid.


What is Difference between relief valve and safety valve?

Relief valve always position in the suction line in oreder to relief the extra pressure, while safety valve is always placed at discharge line to release excess pressure.I would take that one step further by stating that a " RELIEF VALVE" is one that is "meant" to be lifted off its seat, as opposed to a "SAFETY RELIEF VALVE" which is not!DIFFERENCE BETWEEN RELIEF VALVE AND SAFETY VALVE:1. Releif valve is applicable in the fluid system.safety valve is applicable in the gaseous system.2.Relief valve opening is directly proportional to the pressure rise.Safety valve opening is will happen at after reaching the setpressure.3.Mode of relif vlave line is again connected to the suction.But in the safety valve is just vent-out there is no connection tosuction.


Do all propane tanks have a relief valve?

Yes, all propane tanks are required to have a relief valve for safety reasons. The relief valve helps release excess pressure in the tank if it builds up to dangerous levels, thus preventing potential explosions or leaks.


Difference between Thermal relief valve and safety valve?

A thermal relief valve is a liquid-only relief due to expansion of a liquid with increased temperature.A safety valve relieves pressure due to a gas.It should be noted that "safety valve" is a general term which could refer to Pressure Relief Valves (PRVs) or Pressure Safety Valves (PSVs), terms which are used synonymously in some industries (such as the petroleum industry) to refer to all relief devices in general.


What is selection criteria?

Selection criteria are the job-specific skills, personal qualities, desirable qualifications, knowledge and experience that the selection panel believe are needed to perform the duties of the advertised position successfully. Applicants are assessed against these criteria to determine their merit for the position. The main purpose of selection criteria is to create a level playing field for all prospective applicants so that each applicant is given the same opportunity to apply for the job. Selection panels use selection criteria to shortlist written applications for interviews.


What is huddling chamber in a safety valve?

Part I-Sizing and Selection Downstream Segment API STANDARD 520 EIGHTH EDITION, DECEMBER 2008 huddling chamber: An annular chamber located downstream of the seat of a pressure relief valve for the purpose of assisting the valve to achieve lift.