The density of high-tensile steel, such as the steel grade 8.8, typically ranges from 7,850 to 7,900 kilograms per cubic meter (kg/m³) or 7.85 to 7.90 grams per cubic centimeter (g/cm³). The density of steel can vary slightly depending on its composition and specific alloying elements.
It's important to note that the density of steel is a property that can be influenced by factors such as temperature and processing conditions. The values provided here are general averages, and for precise engineering applications, it's advisable to use the specific density values provided by material suppliers or manufacturers.
Grade 12.9 fasteners can be any alloy steel, quenched and tempered. The density of 4130 (a relatively common alloy steel) is 7.85 g/cc.
Here's a data sheet for 4130, in case you were curious:
http://www.matweb.com/search/DataSheet.aspx?MatGUID=284aa856470341acbf3c16bc90849ea1
It is not 12.9 as previously stated.
There is no specific steel grade used in grade 8.8 fasteners meaning that the exact density will vary from manufacturer to manufacturer.
As a general rule of thumb, it is fairly safe to assume the density of any generic steel grade to be 7.8g/cm3 although the actual density could vary anywhere between 7.75g/cm3 and 8.05g/cm3 depensing on the respective densities and quantities of alloying elements.
As an example; taking an M10x35 grade 8.8 bolt to DIN 912, I estimate the volume to be 5.51165cm3 and it has a mass of 43.29g giving a density of 7.854g/cm3
Original Answer:
it is 12.9
The density of high tensile steel grade 8.8 is approximately 7.85 grams per cubic centimeter (g/cm³).
High tensile steel put simply is used where structures require high tensile strength. Tensile stress is where the forces on a material are "pulling" from each end away from the centre. Steel can be alloyed with certain materials such as aluminum to create a material that is stronger under tensile loading. An example of where high tensile steel is required is the cables of the ANZAC bridge that support its deck. Hope this helps..
Bhalla Fasteners is high tensile industrial fastener manufacturing company, producing fasteners for Earth-Moving equipments and automobile components.We are best fasteners manufacturers in Ludhiana.
high tensile stainless steel
increase carbon and manganese
It will be at least 117,000 psi and as high as 290,000 psi - the range depends on the tempering temperature and heat treat
Q-145
Grades of high tensile steel are based on their tensile strength and heat resistance. The best of these are used in axles and other high stress constructions that are required to operation safely.
High tensile steel is strong steel. It is 10 times stronger than wood and more than twice the tensile strength of mild steel. High tensile steel is commonly used in highway guardrails.
Yes. Grade 8.8 refers to a standard (ISO 898-1) which defines the tensile strength (around 55 tons/square inch).
No
High tensile steel put simply is used where structures require high tensile strength. Tensile stress is where the forces on a material are "pulling" from each end away from the centre. Steel can be alloyed with certain materials such as aluminum to create a material that is stronger under tensile loading. An example of where high tensile steel is required is the cables of the ANZAC bridge that support its deck. Hope this helps..
Hyundai have always used high tensile steel in certain components of all their vehicles.
High Tensile Steel (HTS) is generally used for prestressing tendons.
the grades of steel are S275,S355and S460
Bhalla Fasteners is high tensile industrial fastener manufacturing company, producing fasteners for Earth-Moving equipments and automobile components.We are best fasteners manufacturers in Ludhiana.
high tensile stainless steel
mild and high tensile steel can not be combined,because of there different chemical and physical properties as structural component, p k sharma