2x is the first derivative of x2.
Closed centre sytems, (where the valve stops the pumps oil flow completely when in neutral), don't need power beyond as the oil pressure supply is piped to all valves simultaneously. Power beyond is for open centre systems, where the oil keeps flowing, returning to tank, even when no work is being done. Without power beyond, you couldn't add a second or third valve (because the oil, being able to return to tank from the first valve has no resistance. So power beyond plugs the flow in the first valve causing the oil to flow to the second valve, instead of to tank. The second valve (or the last valve if there are more than two), allows the oil to flow to tank, and so complete it's circuit.
The guaranteed heat rate, indicated on performance data table of power plant is calculated in accordance with the following formula: HR = (Qms x Hms - Qfw x Hfw + Qhrh x Hhrh - Qcrh x Hcrh - Qas x Has + Qmu x Hmu) x 3600 / W HR = heat rate [kJ/kWh] W = gross power output [kW] Q = mass flow [kg/s] H = enthalpy [kJ/kg] Subscript: ms = main steam fw = boiler feedwater hrh = hot reheat steam crh = cold reheat steam as = auxiliary steam extraction from turbine cycle for boiler users mu = make up water at condenser
a hydraulic jack is a mechanical arrangement that uses the power of fluids(hydraulic - study of mechanical property of fluids) to lift really heavy objects It consists of two enclosed containers connected to each other with a certain volume of liquid between them.Each of this containers has a piston , the first container has a smaller diameter while the second is large and has a greater diameter when force is applied to the piston of the first container the liquid moves form the first container to the second container and exerts a force on the piston causing the piston to be displaced since the second container is bigger a big displacement in the first container causes a small displacement in the second container but since the work w = f.d remains constant the force increases hence the displacement in the second container is used to lift heavy loads
In a normal hydraulic power pack you get a pump and motor to power it, the hoses, hydraulic fluid to fill it with as well as the rams to power whatever it is that you are using to connect to the pump and lines.
A gas turbine is one type of power plant. It produces power by burning gas to turn the turbine.
2x
d/dx(X^4) = 4X^3 ( first derivative ) d/dx(4X^3) = 12X^2 ( second derivative )
The derivative is 2x based on the power rule. Multiply the power by the coefficient of x then drop the power by one.
The first derivative of e to the x power is e to the power of x.
3/(4*square root(x)) ....Mukesh
Write sec x as a function of sines and cosines (in this case, sec x = 1 / cos x). Then use the division formula to take the first derivative. Take the derivative of the first derivative to get the second derivative. Reminder: the derivative of sin x is cos x; the derivative of cos x is - sin x.
The derivative of ex is ex
2x is the first derivative of x2.
It is negative one divided by 4 multiplied by x to the power of 1.5 -1/(4(x^1.5))
-1
x^0 = 1 for all x. The derivative of 1 is always zero.
Express the cosecant in terms of sines and cosines; in this case, csc x = 1 / sin x. This can also be written as (sin x)-1. Remember that the derivative of sin x is cos x, and use either the formula for the derivative of a quotient (using the first expression), or the formula for the derivative of a power (using the second expression).