0
What else can I help you with?
What is an interference fit when machining?
An example of an "interference fit" is when you have a pin that needs to go into a slightly smaller hole. The difference may be only 2/1000 inch (machinists measure parts in thousandths of an inch). In this case, the pin won't just slide into the hole, but needs to be forced, usually with a devise called a "press." . The usual purpose of an interference fit is to join two mating parts together in a way that they won't come apart without having to use other, more normal, fastening methods. For an elementary example of an interference fit and purpose, if you drive a nail half-way into a wall so you can hang something onto the part of the nail that sticks out of the wall, there is an "interference fit" between the nail and the new hole in the wall that the nail made.
How Do You Screw A Coat Hook In To A Wall?
In order to screw a coat hook to the wall you need a drill. Additional metal plates may be necessary to keep the coat hook to the wall.
What is solid wall boiler setting in boilers?
Sir,Plz reply
How are height dimensions usually obtained for exterior elevations?
by Projecting from a typical wall section -Alex:)
What is meant by pinning?
pinning is the phenomena in which a domain wall is blocked or the magnetization is blocked/trapped due to surface defects.
What is the difference between a fire wall and a fire barrier smoke limiting wall?
A firewall is a structural barrier designed to prevent the spread of fire between different sections of a building, providing a high level of fire resistance and often extending from the foundation to the roof. In contrast, a fire barrier smoke limiting wall primarily aims to limit the passage of smoke and hot gases, while still offering some level of fire resistance, but not to the same extent as a firewall. Fire barriers can be used to compartmentalize spaces for smoke control, whereas firewalls are meant to safeguard against fire propagation.
Does 1 hour smoke barrier need fire caulk?
A smoke Barrier wall needs to resist the passage of smoke. UBC say that a Smoke Barrier wall needs to be constructed of at least a 1 hr. fire rated wall. A 1 hr Fire rated wall needs to be Fire Caulked.
What is the difference between DPC AND DPM?
DPC(damproof course) is an horizontal barrier in a wall designed to prevent moisture rising from the structute of the capilary action.
Which is a major difference between the cell membrane and the cell wall?
One major difference is that the cell membrane is a flexible barrier that surrounds the cell and regulates what enters and exits the cell, while the cell wall is a rigid structure located outside the cell membrane that provides structural support and protection to the cell.
What was the barrier between east and west Berlin?
The Berlin Wall.
What is the difference between coral reefs and The Great Barrier Reef?
A fringing reef forms a continuous underwater "wall" for some distance, where as a "barrier Reef" are shorter in distances, and have large gaps in them....and will be between shore and the Barrier Reef..............Sea Rambo
What is the difference between a retaining wall and a breast wall?
breast wall
In a smoke barrier wall do you have to seal all penetration on both side of the wall?
Yes, in a smoke barrier wall, all penetrations must be sealed on both sides of the wall to maintain the barrier's effectiveness. This includes electrical, plumbing, and mechanical penetrations. Proper sealing prevents the passage of smoke and ensures compliance with building codes and safety standards. It is essential for maintaining the integrity of the smoke barrier during a fire event.
Do you need a moister barrier when framing in a wall inside a basement wall if you are going to insulate it.?
You should put a plastic moisture barrier between the concrete and the studs so that moisture will not get to the insulation.
What acts as a barrier between the inside of the cell and the cell's environment?
Cell membrane
What is one main difference between the cell wall and the cell membrane?
One main difference is that the cell membrane is a selectively permeable barrier surrounding the cell, regulating the passage of substances in and out, while the cell wall is a rigid structure located outside the cell membrane that provides support and protection to the cell.
What is the word for the imaginary space between the actors and the audience?
The Fourth Wall.
