Depending on the context, they usually are referring to the same thing. In some cases, people refer to air dry solid film lubricants as dry film lubricants. For more information check link.
It is air film which has a wedge shape
A source of gamma radiation is placed on one side of the weld, and a photographic film is placed on the other. Bubbles and weak points will appear on the film.
bulk mean temperature is average temperature of the fluid through out its flow. film temperature is average of outer most layer of the fluid and the surface its flowing
The force is always down wards, lubrication is a big problem. The relative motion between the x head pin and bearing will never allow to form a thin film lubrication as their relative motion is only for few degree and that too never in one direction
due film boiling ,metal temperature riser tubes increase cases for rapture.
The difference between silent film and sound film is because that silent film has no sound whatsoever and a sound film has sounds in it
Difference between thick and thin film resistor is not related to thickness but its based on how the film is applied to the surface.
These substances are caused to insinuate themselves between the surfaces, and have the property of so separating them as to prevent serious abrasion. The solid and semi-solid lubricants seem to act as rollers between the surfaces, or form a film between them which itself suffers abrasion or friction. The liquid lubricants, however, maintain themselves as liquid films between the surfaces, upon which the bearing floats
they have differe.nt method of deposition of film of conducting material. Hence, the difference between two is their fabrication process.
there the same
These substances are caused to insinuate themselves between the surfaces, and have the property of so separating them as to prevent serious abrasion. The solid and semi-solid lubricants seem to act as rollers between the surfaces, or form a film between them which itself suffers abrasion or friction. The liquid lubricants, however, maintain themselves as liquid films between the surfaces, upon which the bearing floats
A digital film is stored and played from a hard drive. Technically its not film at all.
There is no difference, in the movie they used the same dialogue as they did in the book.
An indie film simply isn't supported by a production company but it can still be widely available.
The difference is that film is usually thin and very flexible, sheet is thicker and rigid.
1) using a lubricant film between moving parts. 2) using low friction materials, such as Teflon.3) reducing surface roughness.
Its just a different way of measuring light sensitivity. ISO is more common..