mould is a hollowed out block that is filled with a liquid like plastic , glass, metal, ceramic raw material. while cavity is a small passage for flow of material in mould or die.
what is difference between lateral and longitudinal?
What is the Difference between technology innovation
What the difference between process piping and power piping?
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
=== ===
The mold cavity is made with the help of a pattern. so, in mold cavity we pour the molten metal, to get the casting now if we want a hollow cavity again in casting core comes to play.
To calculate the overcapacity of a glass bottle blank mold, you would measure the volume of the mold cavity and compare it to the actual volume of the glass bottle being produced. The overcapacity is the difference between the mold cavity volume and the required volume of the glass bottle to account for any variations in glass expansion during the manufacturing process.
Die Casting is a general name for a process where molten metal is forced into a mould cavity under pressure to produce complex, high-precision parts. It can include processes like gravity die casting and pressure die casting for metals including aluminium, zinc, and magnesium. Pressure Die Casting can be employed to refer to high-pressure die casting, where molten metal is poured at high speed (typically 1,000–30,000 psi) into a steel mould, which makes it possible to have delicate details and produce faster. It is applicable to high-volume, precision parts like automotive parts. Precious Enterprises is a Pune-based firm that deals with designing pressure die-casting mould bases with custom solutions for industries demanding robust, precise moulds. With their advanced manufacturing and quality inspection, they supply assured, high-performance moulds for pressure die-casting applications.
sponges have central cavity and sea anemone have gastravascular cavity
Is there a difference in chest cavityt between females and males?
mold is actually a live when rot is just when something is decaying.
The transfer molding process beginning with the uncured rubber placed in a transfer plate located above the cavity area, rather than being placed directly in the cavity as in compression molding applications. heat is then applied to the rubber and transferred from the transfer plat, being pushed through a gate by a piston, into the cavity where the rubber is then vulcanized using heat and pressure.
Mold
water spills in a dry place
It is called a mold.
MFT = V(mold/ cavity volume) / Q (Volumetric Flow Rate)
The cavity left behind in the rock after an organism's hard part has dissolved is called a mold. Mold fossils are negative impressions of the organism that once occupied that space.