Normal flow is 100% of the flow you actually expect. Rated flow is the maximum safety factor times the normal flow.
i.e. for a maximum safety factor of 1.2
Normal flow = 100 gpm
Rated flow = 1.2*100 gpm = 120 gpm
Safety factors are applied to ensure a piece of equipment has some flexibility of operating conditions in its application.
The minimum flow is the minimum safety factor time the normal flow
i.e.
i.e. for a maximum safety factor of 0.5
Normal flow = 100 gpm
Rated flow = 0.5*100 gpm = 50 gpm
If sized properly a pump specified in this way could operate at any point between 50 and 120gpm with no problems.
The difference between normal flow rate and actual flow rates is the temperature and pressure at which measurements can be made. Actual flow rate measurements are made at the current temperature and pressure of the process while normal flow rate measurements are made at 101.325 kPa pressure and 0 degrees Celsius.
Standard flow rate is the correction applied to the actual flow measurement. This is based on measuring the temperature and pressure of the flow system.
Not much, avaliability is the same also. Our default has changed to killed carbon steel.
Sear stress are forces applied in opposition, producing a shearing or tearing force. Bearing stress is a load placed in one direction, such as the weight of a building bearing on the foundation.
mechanical can hold up to life but medication is needed every day for life biological is a more normal life but have to re op. 10- 20 years gl
You cant tell the difference with a normal and single handed wrench.....So...Nobody knows
Precision instruments are those instruments which measures very accurately while non precision instruments are used for normal measuring of quantity.
prices
actual costing uses actual indirect-cost rates normal costing uses budgeted indirect-cost rates
A pressure gauge indicates actual pressure and a differential pressure gauge indicates the difference in pressure.
if the actual loss is greater than normal loss. it is known as abnormal loss but if the actual loss is less than normal loss a gain is obtained which is called abnormal gain or effectiveness
the difference between a micro pet and a normal pet is that a micro pet is a really small animal such as a micro pig and a normal animal is a animal just like a normal person normal size normal wight and that is the difference between a normal animal and a micro animal.
A pulse deficit is the difference between an actual heart beat and the pulse felt in the wrist or neck. Normal pulse deficits can be felt in someone with a pacemaker.
What is the difference between normal saline solution and ringer's lactate solution?
what is defference between normal and preference shares
The difference between normal and average respiratory rate is simple. Normal is healthy and cannot change and average most certainly can change.
The treatment effect is the difference between the observed outcome and the "normal" outcome
The treatment effect is the difference between the observed outcome and the "normal" outcome
The difference between a normal guitar and a junior guitar is primarily its size. A Junior guitar is shorter and about three quarters the size of a normal guitar.