Piercing is a real service, Blanking is something someone made up
what is difference between lateral and longitudinal?
What is the Difference between technology innovation
What the difference between process piping and power piping?
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
=== ===
blanking is an operation where the material is cutout by using a punch and die. The punch will be in the shape similar to that of the required blank. the cutout part is the part which is required and the left out material is the scrap. piercing is the opposite, the cutout part is the scrap and left out part is the final part.
Blanking and punching are both shearing operation. The difference is only in the scrap. In blanking what you cut out is of interest.In punching what you cut from is of interest.For example: You cut a hole in a sheet metal. If you are interested in the disc that is cut out, then the process is called blanking. The sheet metal with a hole through it is the scrap. If you are interested in the sheet metal that now has a hole through it, then the process is called punching. The disc is the scrap.
Whether it is blanking or piercing, size of opening in sheet is governed by punch and size of cutout piece is governed by Die. So, for piercing, Punch size should be same as required hole size and clearance should be given on Die. For e.g for a hole size Dia 8, punch size should Be 8mm and die size 8 + clearance For Blanking, DIe size should be same as size of blank and clearance should be give on punch. So for a blank of Dia 8, die size is of 8mm and punch size is 8 - clearance.
A rejected piercing will slowly push it's way out of the skin. An infected piercing will require antibiotics from a doctor.
A Monroe is the upper left lip and a Madonna is the upper right lip
yes jeydon wale has a lip piercing on the left side and kyle/hunter has a liup piercing on the right!<3
a necklace goes around your neck and an earring goes in your ear piercing
it is a multistation die.the die can perform very complex work doing piercing,blanking,forming lancing and notching.these dies are simple in construction and easy to operation
In a healed piercing internally threaded and externally threaded makes no difference to the piercing, it's a client's choice what jewellery you want to go with. Some piercers will get all jumpy about the threads cutting the piercing but in real life if the piercing is cleaned and changed properly it doesn't make a lot of difference Just be sure you are purchasing high quality jewellery and not junk from the mall.
This is totally dependent upon the Supervisor's personal discretion. Usually, a Supervisor would ban someone for blanking answers between 3 and 7 days. However, it depends on the severity of the action. The Supervisor may suspend you longer depending on the severity of your blanking activity.
Blanking is the act of a user deleting a good answer, and replacing it with false/useless information.
it's called a bridge piercing