in orde to reduce the pressure........cming from the evaporator
Once the fluid travels through the radiator on the back of the refrigerator, the valve will open and use the force of the piston retracting to suck the fluid into the compressor, where the pressure will cool the refrigerant over again.
It is fitted on discharge line after condenser, where the gas enters in liquid forms.
Capillary tube is a very simple device and can be manufacture easily at low cost. The capillary tube can limit the maximum amount of refrigerant to be charged eliminating the need for a receiver in the refrigeration system. Another advantage is when the refrigeration plant is stopped, the pressure along the capillary tube and the entire system remains constant which means that if the compressor is restarted it does not need moreÊpower to overcome high pressure in the system. Hence, smaller compressors can be used instead of big, expensive ones. A disadvantage with capillary coil is that this system is non adjustable due to the fact that the control of the flow of pressure is dictated by the inside diameter of the tube.
Technically, it is an analog of a resistance-capacitance filter. Which is a device that restricts the passage of higher frequency components. In a mechanical system such as the 'shock absorber' in a car, the resistance part is provided by the fluid passing through a small hole; and the capacitance component by the volume of the reservoir. A shock absorber in a car really damps out vibrations, it has a smaller effect on real shocks.
In vcrs system there is a phase conversion system i.e. liquid state to gases state and this happens with latent heat of working medium but on the other hand there is only gases expansion on expander cylinder and no phase changes occurs and in cylinder we can not expend two phase system..
in orde to reduce the pressure........cming from the evaporator
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
cause its a gas
The generator in a vapor absorption system for a refrigerator consists of all of the components that make the refrigerator work. The system allows for compression, condensation, evaporation, and expansion.
absorption and filtration
The basic function of a cooling unit is to warm up the contents of the system.
Absorption of nutrients and water.
The refrigerant in the refrigrration system absorbs large quantities of heat and releases it to the atmosphere
usually hydrogen or helium gas were choose as inlet gas/ carrier from evaporator to absorber coil. Inlet gas contribution toward total pressure in the system where according to formula to determine partial pressure in the system PTOTAL SYSTEM = P HYDROGEN (inlet gas ) + P AMMONIA (REFRIGERANT )
You are probably referring to Absorption refrigeration. Try Google.
The primary function of the digestive system is to supply the cells of the body with nutrition. It does this by ingestion, digestion, and absorption. The waste materials that are not used are then eliminated.
pressure in a refrigeration system is changed in the