1200 pounds
10 or above is common place. 11 is industry standard. So if you go into an elevator and it says it can hold a maximum of 20 persons with weight 1,500kg and that elevator has a factor of safety of 10, it can hold 200 persons or 15,000kg before it fails.
While Elisha (Eli) Otis invented the elevator brakes, the elevator was invented by someone else.
When pulling on yoke the elevator moves "up" towards the sky, when pressing down on the yoke the elevator moves "down"
Elevator ropes are secured to the elevator with shackles.Older elevator shackles were made up with a roset witch is made up with melted lead babbit.Todays elevators use a wedge shackle....
Mechanical advantage is maximum when weight lifted is extremly high and for which C/W is extremely small so as to be negleted, Max. Mechanical Advantage=1/m
The maximum weight capacity of this elevator is 2000 pounds.
The maximum weight that can be carried by the elevator is 1500 grams.
The maximum weight this elevator can safely carry is 1000 kilograms.
The maximum weight capacity for the elevator is 900 kg, considering a 90 kg weight limit.
The maximum weight limit of the elevator is 2000 pounds. Exceeding this limit could pose a safety risk and may cause the elevator to malfunction. It is important to adhere to weight restrictions for the safety of all passengers.
An elevator has a weight limit of 350 pounds a box of machine parts weighs 25 pounds which inequality best describes the maximum number of boxes b that the elevator can hold
The maximum weight limit for this elevator is 2000 lbs. It can safely accommodate up to 20 people weighing 100 lbs each.
The maximum speed of the Taipei 101 elevator is 37.7 mph.
The mass must be greater than the mass of the elevator including the maximum amount of cabling that it has, plus the carrying capacity plus a safety margin.
The counterweight in elevators is typically designed to be around half the weight of the elevator car when fully loaded, to help balance the weight and reduce the amount of work the elevator motor needs to do. It is calculated based on the maximum load capacity of the elevator car and the weight of the car itself when it is empty. The counterweight moves in the opposite direction of the elevator car to help offset the weight imbalance and ensure smoother operation.
An elevator counterweight is a weight that is used to balance the weight of the elevator car. It is connected to the elevator car by a cable, which wraps around a pulley system. The counterweight moves in the opposite direction of the elevator car, helping to reduce the amount of energy needed to lift and lower the car.
Of the maximum weight capacity of an elevator in a skyscraper (tensile strength of the elevator cable). you don't want it to snap when people are on it and send them hurtling hundreds of meters downwards.