answersLogoWhite

0

The six point technique of fault finding used in mechanical maintenance is called the hexagonal method. It also sometimes called the six sigma and is a process of quality control.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

What are the hazards associated with carrying out fault location on mechanical equipment?

Carrying out fault location on mechanical equipment poses several hazards, including exposure to moving parts, which can lead to entanglement or injury. There is also the risk of electrical shock if the equipment is electrically powered, especially if proper lockout/tagout procedures are not followed. Additionally, working in confined spaces can lead to hazardous conditions such as poor air quality or limited access for emergency escape. Lastly, the potential for falling objects or slips, trips, and falls further increases the risk during such maintenance activities.


What is the procedure to be adopted to establish the background of the fault?

The procedure to discover the background of the fault is called root cause analysis. This type of analysis takes the approach of finding the cause of a failure, instead of treating its symptoms.


What is the half split technique?

half split technique is a fault finding method in which faulty area is compared with one of the similar What_is_the_half-split_fault_finding_techniquearea. in hydraulic rig, say if cylinder B is not working, we compare it against another working cylinder, say cylinder A. By comparing we collect data and determine the difference between both working and non working components.i.e. what is the status of incoming and out going flow in both (working and non working) components?are both pressurized only when it should?etc.AA


What is injection and sampling in fault diagnosis?

chicken dippers!


What is the importance of computing in mechanical engineering?

Computer Engineering is the science of programming. Mechanical Engineering is a wide field that covers subjects from material properties (used in everything from developing chips to earth-moving machines). A typical Mechanical Engineer will have a variety of skills that envolve "dynamics", "statics", and a lot of other fun stuff. However, to know how to program things that involve Mechanical Engineering, you would need to know a fair amount of the subject. Knowing how to program something without knowing how it works would need...at best an interprerter. I have an electronic, electrical, and chemical background; however I know how to program a lot of things and have a few computer languages under my belt. My experience is that to know the real world around you and knowing some languages is a lot more helpful than just programming. Of course, I am a little biased, but if you see my logic, you can see that knowing Engineering helps you to understand the world around you and you become a much more effective programmer or Systems manager. Life is difficult, Love difficult.

Related Questions

What is the unit substitution fault finding technique?

Unit of fault level is KA. Kilo amps


What is the input output fault finding technique?

Its fairly self explanatory, put the input IN then check the output at the OUTPUT.


What is Cyclic Fault-Finding?

Cyclic Fault-Finding is a systematic approach used in engineering and maintenance to identify and diagnose faults in a cyclic or repetitive manner. This method involves analyzing data and system behavior over defined cycles to pinpoint recurring issues or patterns that lead to failures. By focusing on cycles, engineers can uncover underlying problems that may not be evident through random inspections. Ultimately, this technique enhances reliability and performance by facilitating proactive maintenance and timely interventions.


How do you tell ayrton senna crashed his car?

It Is Believed It Was A Mechanical Fault With The Car, Not Ayrton's Fault


Why does elevator stuck up?

It must have a mechanical fault.


Fault finding in colour tv receiver?

what are the possible fault in colour tv transmitter and receiver?how we can overcome this fault?


What is unit substitution when fault finding with electrics?

Unit substitution in fault finding with electrics involves replacing a suspected faulty component with a known good one to determine if the issue lies within that component. This method helps isolate the fault by eliminating variables and allows for a systematic approach to diagnosing electrical issues. By substituting units, technicians can quickly identify whether the problem is due to the specific component or if the fault lies elsewhere in the system. This technique is commonly used in troubleshooting electrical circuits and devices.


What is the six point fault finding technique?

1. Test the system, ie make measurements or collect other evidence 2. Analyse the readings 3. Locate fault based on analysis (step 2) 4. Determine the original cause of the fault. (ie find a method to prevent recurrence) 5. Repair the fault (bearing in mind step 4) 6. Retest the system


Fault finding name for tycoon?

Robber Barons


Fault-finding name for tycoon?

Robber Barons


What is the synonym of finding fault with?

One such word is criticize.


What is a fault-tolerance technique in which one device or component duplicates the activities of another?

Mirroring