0
What is the type of steel in a steel blade of a steel handsaw and what is young modulus for this type of steel?
Steel handsaw, steel hacksaw and steel bandsaw blades are made from high speed steel. The most popular specification of steel used to produce these products is BS4659 BM2 commonly known as M2 high speed steel. M2 offers good wear resistance with excellent toughness after heat treatment.
What else can I help you with?
Young modulus for 1018 steel?
30,000,000 psi
What is the Young's Modulus of high strength steels?
180 -220 Gpa similar to mild steel
What is young modulus of spring steel?
About 29-30 million psi, depending on type of steel, but close enough for most steels.
What is the dimensional formula of young's modulus?
[Young's Modulus] = M1L-1T-2 __> this is the dimensional formula
What is the shear modulus for astm a 1011 hslas grade 60 steel?
Most steels have Young Modulus, E, of 30 million psi and Poisson ratio, u, of about 0.30 Shear Modulus = E/2/(1+u) = 30/2.6 = 11.5 million psi
What is the young's modulus of forged steel?
140Gpa
Is Young's modulus of rubber is greater than steel?
No, Young's modulus of rubber is not greater than that of steel. Young's modulus is a measure of a material's stiffness, and rubber is much more flexible compared to steel. Typically, Young's modulus for rubber ranges from about 0.01 to 0.1 GPa, while for steel, it is around 200 GPa. This significant difference indicates that steel is much stiffer than rubber.
Young modulus for 1018 steel?
30,000,000 psi
What will happen to youngs modulus of steel if radius is doubled?
young modulus remain unaffected ...as it depends on change in length ..
What is the young's modulus for 316stainless steel?
29,000,000 psi ( 200 GPa)
What is the young modulus of 1045 steel?
(30)(10)^6 psi
What is the Young's modulus value for suspension system materials?
Usually a minimum of 200 GPa. This is the Young's Modulus for structural steel a common material for suspension systems. Steel is great in tension. Concrete is weak in tension.
What is the tangent modulus of mild steel?
The tangent modulus of steel varies depending on if the steel has yielded.If the steel has not yielded, and is still elastic (stresses less than approx. 275 MPa (39885 Psi) the tangent modulus will be equal to the Young's Modulus, 205 GPa (39885367)If the steel has yielded, the tangent modulus will be related by the Ramsberg-Osgood Equation, but a reasonable value to use would be approx. 1.5 GPa (2175565 Psi)
Does young's modulus of steel increase with thermal treatment?
no The purpose of heat treating carbon steel is to change the mechanical properties of steel, usually ductility, hardness, yield strength, or impact resistance. Note that the electrical and thermal conductivity are slightly altered. As with most strengthening techniques for steel, Young's modulus is unaffected.
Known value of Young's Modulus for mild steel?
the modulus for brass is 91*109 Nm-2
Is Young's Modulus the same as Modulus of Elasticity?
Yes, Young's Modulus is the same as Modulus of Elasticity.
Is the modulus of elasticity the same as Young's modulus?
Yes, the modulus of elasticity is the same as Young's modulus.
