The weight of unfilled polycarbonate is 0.0433297 pounds per cubic inch
2.5cm is equal to 1 inch
The weight of 1 mm thick x 1000 mm x 1000 mm galvanized iron sheet is 7.85 kilogram. This is based on taking the density of the iron sheet to be 7850kg per cubic meter.
13 threads per inch pitch is 1/13 = 0.077 inch ( pitch is distance between threads)
A square meter is an area und a cubic meter is a volume. There is no conversion possible. Kilogram per cubic meter is the SI measure of density and is represented as kg/m³, where kg stands for kilogram and m³ stands for cubic metrer. The density of water is about 1000 kg/m³, since a cubic meter of water weighs 1 megagram or 1 tonne. The standard measurement for weight and quality of fabrics and paper is grams per square meter, usually abbreviated as GSM.
35 to 70 It depends on the mix of concrete you are using. A basic 1-2-3 mix is 5 1/2 cubic feet of portland cement (a wheelbarrow, depending on its size, holds 1/2 to 1 cubic feet), 11 cubic feet of sand, and 16 1/2 cubic feet of stone (called aggregate) from 1/2 to 1 inch in size each. To this is added about 12-15 gallons of water.(1 1/2 to 2 cu.ft.). This will make just a little less than 1 cubic meter of concrete. A weaker mix for basic work not needing structural strength a 1-2-3 mix of 1 part stone, 2 parts cement and 3 parts sand can be used, this would require a bit less than 1 part water. A stronger mix of 1 part cement, 1 1/2 parts sand and 3 parts stone with about 1/2 part water is good for heavy duty concrete work. Stone will increase the strength of concrete and sand will weaken it. Using too much or too little water in the mix will weaken it as well. Additionally, concrete with too much water or too little cement tends to shrink and crack as it sets. The amount of water to use is mainly dependent on the cement in the mix. There should be at least half as much cement as sand in any mixture. The amount of stone to use should be between 1/4 and 3/4 of the total mixture. Grouts and mortars use no stone and may add limestone as an additional binder. These should not be used for structural concrete, but can be used for foundation pointing, bolt anchoring or mortaring brickwork.
1 cubic inch of lead has a weight of approx 13.11 pounds weight.
.163
Teflon weighs approximately .079 LBS per cubic inch.
1 cubic inch.1 cubic inch.1 cubic inch.1 cubic inch.
what is the weight per cubic inch of W50 steel
1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).
once cubic inch of plutonuim is about 715 pounds 1 cubic inch = 16,387 06 cm2 Density of plutonium: 19,816 g/cm3 The weight of 1 cubic inch of plutonium = density x volume = 324,726 grams
Silver has a density of 10.49 grams per cubic centimeter. There are 16.387 cubic centimeters in a cubic inch. Translates into 171.90 grams for a cubic inch of silver, which is about 6.06 ounces. WRONG!
Approx 1.4 pounds force.
1 inch = 2.54 centimeters 1 cubic inch = (2.54)3 cubic centimeters = 16.387064 cubic centimeters
Cubic inch is 1 inch x 1 inch x 1 inch There are 12 inches in a foot, so 1 cubic foot = 12 x 12 x 12 = 1728 cubic inches. Hence a cubic foot is 1728 times bigger than a cubic inch
3.14159 x radius squared x thickness x .283 (weight of 1 cubic inch of steel)