0
What else can I help you with?
What Metal used in aircraft?
the metal used in building most planes is alumiun as this type of metal as it can expand as the pressure in side the aircraft is greater than the pressure outside the aircraft. it is also the lightest suitable metal although boeing's 787 has been constucted with acompisite material.
What kind of sheet metal is strong lightweight and it has to be cheap?
All of those qualities are relative. Aluminum is a good start. For formed sheet metal, type 5052-H32 is pretty common.
What are Allen keys made of?
A type of high carbon steel.
What is the Hardness Rockwell C scale?
This is a method used to determine the hardness of a metal. If you know the type of metal and the hardness, this will tell you the Tensile Strength of the metal and how well it was heat treated. The method uses a ball or a pin to strick the metal and leave a small indention. The size and depth that the ball makes in the metal is inversely proportional to the hardness. Using the scale, you can then determine if the part has completed the proper heat treatment as required by the Engineering drawing. There are 3 Rockwell scales: A, B, C. Rockwell C scale is for the hardest of metals such as steel. Rockwell B is for metal such as soft aluminum and A is for even softer metals.
What type of weld is it when the edge of one piece of metal is placed at ninety degrees on the surface of another piece of metal?
Two pieces of metal welded at a 90 degree angle is called a corner joint. Other common joint types: -Butt joint: two pieces of metal laid side by side and welded at the meet, essentially forming one sheet. -Lap joint: similar to a butt joint, but with overlap between the two pieces. -Tee joint: one piece is welded at a 90 degree angle to the second, but not at the edge (forming a 'T' shape).
Do safety pins stick to magnets?
Yes, safety pins are typically made of steel, which is a type of metal that can be attracted to magnets. Therefore, safety pins will stick to magnets.
WHAT TYPE OF HAZARD ARE METAL SHAVINGS STAPLES AND PUSH PINS?
Medical
What is pin made up of?
A pin is typically made of metal, such as steel or aluminum, which provides strength and durability. The metal is often coated with a layer of plastic or a similar material to prevent rust and improve grip. Some pins may also contain additional materials like rubber or ceramic, depending on their intended use. Overall, the composition can vary based on the type of pin, such as sewing pins, safety pins, or decorative pins.
What type of metal are screws made of?
metal....N.A metal....N.A
What is the name of the place where metal is made?
A place where metal is made is called a foundry or a smelter, depending on the type of metal production.
Is steel a type of metal?
Yes, steel is a type of metal that is primarily made up of iron and carbon.
How can you pick a lock with a bobby pin?
Bobby pins are for movies, handcuffs and luggage locks, and not much else. Anything above the most basic lock imaginable is bobby pin proof really. They're just not the right type of metal or the right size and shape.They're good for handcuffs and for toy boxes though.Below is a link to a video of how to use a bobby pin to open these locks. If you're trying to get into anything above that level of lock though, you're going to need a better tool.Any lock that can be opened with a bobby pin is going to work on essentially the same principal as the handcuffs trick.
What is the type of metal phones are made from?
metale
What type of metal is microwave made of?
Steel
What type of the metal the crankshaft made of?
steel
What type of metal are trolleys made of?
aluminum
What metal are the 100 lira made from?
It is made out of a stainless steel metal but i don't know what particular type!
