answersLogoWhite

0

What else can I help you with?

Continue Learning about Mechanical Engineering

What are sizes of drilling machine?

There are many sizes of drilling machine. the smallest is possibly the Dremel drill and they go all the way up through handheld electric drills to floor drill presses taller than people.


How do you properly use a clutch on a big rig so it will last?

Best way is to just float the gears - shift without using the clutch. However, if you do this wrong, you'll destroy your transmission. If you use the clutch when shifting, firstly, you double clutch - try shifting it like a car transmission, and you destroy the transmission. If you don't know how to do this, go to a truck driving school. When you shift, only push in the clutch far enough to disengage the transmission - don't go all the way to the floor with it, or else you'll wear out the clutch break. Don't roll out of gear with the clutch depressed.


How do hydraulic barber chairs work?

When one presses the pump pad, the chair goes up on its own on a hydraulic barber chair. There is also a mechanism that will make the barber chair go down.


What is the definition of a w.w.unf thread size?

Oh, dude, a w.w.unf thread size is just a fancy way of saying "Unified National Fine Thread." It's like when you go to a fancy restaurant and they call fries "pommes frites." It's basically a standard measurement for screw threads in the United States. So, next time someone asks you about w.w.unf thread size, you can impress them with your knowledge and then promptly forget about it.


What is difference between full strength butt weld and full penetration butt weld?

a weld that does exactly what it sounds like, the molten metal that is created when welding is created all the way through the materials being welded. for example, if it is a 1/16th inch steel plate, a full penetration weld would create a molten bead from the front to the back of the plate. A full pin weld is when u have a bevel on one side that u weld first flip it over arc air gouge the other side and weld that side up

Related Questions

What is a polite way to ask to go to the toilet?

A polite way to ask to go to the toilet is to say, "Excuse me, may I please be excused for a moment?" or "Would it be alright if I stepped out for a moment?" This approach is respectful and acknowledges the setting you are in.


How Long Has Addition Been Here?

Since the first moment. Because the only way you could go from the first moment to the second moment was to recognise that one (first moment) plus one (another moment) was two!


Does Aston Merrygold go out with anyone?

No he's single at the moment, he's been on a few dated recently but he switches off if he doesn't feel a connection.


Which way does the bevel on the second piston ring go?

The bevel on the second piston ring should face down toward the piston. This orientation helps facilitate proper oil control and reduces the risk of oil consumption by ensuring that the ring seats correctly against the cylinder wall. Always consult the manufacturer's specifications for specific guidance related to the particular engine in question.


How do you reattach a rear view mirror?

Go to a parts store and pick up a glue kit made just for that; Follow the directions. MAKE SURE you glue that mounting plate on the right way---with smaller part of bevel to the glass!


Is there a way to allow network connection between tables in a large conference room for hard connections without stringing cables between the tables?

The term "hard connection" refers to a wired connection. If it is a hard connection then you will need wires. The only way to connect without wires is to go wireless. A wireless router will eliminate the wires.


How do you get reconnected on roblox?

well the only way i know how to do is x the page then get reconnected to the internet connection then go back on it


How you will go to Mars?

There is no way for a person to get to mars at the moment. However in the future it may be possible to get there using a space ship designed for the purpose.


Is there an easy way to get a remote desktop connection?

you can go to either of these website for desktop connection information www.microsoft.com/mac/remote-desktop-client or www.microsoft.com �ۼ Downloads �ۼ Tools and Utilities


What if you cannot get a lawyer to take your case because coruption is rampant in this town?

You go out of the area and speak with lawyers who have no connection to your town.You go out of the area and speak with lawyers who have no connection to your town.You go out of the area and speak with lawyers who have no connection to your town.You go out of the area and speak with lawyers who have no connection to your town.


What is meaning of went?

of Go, of Wend, imp. & p. p. of Wend; -- now obsolete except as the imperfect of go, with which it has no etymological connection. See Go., Course; way; path; journey; direction.


How do you reattach the rear view mirror on a 1992 Ford Explorer?

Go to a parts store and pick up a glue kit made just for that, follow the dirctions. MAKE SURE you glue that mounting plate on the right way-smaller part of bevel to the glass!!! pukenstein@aol.com