Yes, unexposed x-ray film contains a layer of silver halide crystals suspended in a Gelatin emulsion. When exposed to radiation, these crystals undergo a chemical change, allowing for the development of images. The silver in the film is crucial for capturing the x-ray image, but it remains inactive until the film is developed.
Everything fades. However, old Xray films are the same as black-and-white photographic film. They last 100 years plus and counting. There is a big business in converting Xray films to computer files and then harvesting the film for the silver.
between 0.12 and 0.20. As the film gets older the density will get higher. There is a standard out there that limits the usable film "base fog" density to 0.30.
Exposing film to light initiates a chemical reaction that creates a latent image on the film. This image is then developed using chemicals, which convert the exposed silver halide crystals into visible silver particles. The unexposed areas of the film remain unchanged and are washed away during the fixing process, leaving behind the final developed image.
Short version: the developer converts silver halide that was energized by light into black metallic silver. Unexposed halides are washed away by the fixer, leaving varying densities of black metallic silver in the black and white film. In the color process, intermediate steps replace the bms with dyes.
You must protect unexposed film. Excuse me just a moment while I wipe this film off of my eye. Who has NOT seen the Zapruder film?
You will have to be more specific: black and white? color negative? color slide? Polaroid instant film? Do you mean how do the developing chemicals act on film? Broadly speaking, "chemicals" has more to do with development whereas compounds would apply to film. Films are coated in silver halides. When the film is exposed it has what is called " a latent image'. It stays like that until it is developed. Once the film is developed the silver halides turn into black metalic silver halides. At this point we have both on the film and we have to removed the unexposed and undeveloped silver halides. This is done by fixing the film using in and acid mixture that removes the unexposed halides and stops any further developing of the film. The film is then washed until the chemicals are removed. It is then dried. With colour films there are three layer of emulsion. Each layer is sensitive to a particular colour. The process is basically the same as above except that after the silver halides have been processed the colour chemicals are released on each layer by the chemical process.
X Ray film emulsions are sensitive to light.
Sodium thiosulphate (sulphate contains 4 oxygen atoms, thio-sulphate has one of these replaced by a sulphur atom). Dissolves away unexposed silver salts from photographic film or paper.
A photographic negative is fixed by immersing it in a chemical solution called a fixer, which removes any unexposed silver halide crystals from the film. This leaves behind the developed image in silver metallic form. The fixed negative is then washed to remove any residual chemicals before being dried and prepared for printing.
Lithium thiosulfate is a chemical compound with the formula Li2S2O3. It is used in the photographic industry as a fixer to remove unexposed silver halide from film and paper. Additionally, lithium thiosulfate has some potential applications in lithium-ion batteries and in medical imaging.
Sodium thiosulfate is called hypo because it was historically used as a photographic fixer, which removed unexposed silver halide from photographic film. The term "hypo" is short for "hypo-sulfite," indicating its chemical composition.
If the patient's hands are in the field of the xray they will appear on the film, so even if they are on the stomach they will appear as if they are over or near the spine. If someone has helped immobilise the patient for the xray, then their hands may appear on the film.