A patient seated fully upright is said to be in the "sitting" or "upright" position. This position is commonly used for examinations and procedures to promote comfort and facilitate breathing. It can also help healthcare providers assess the patient's condition more effectively.
When driving a vehicle equipped with airbags, you are safest when seated in an upright position with your seatbelt fastened. This position allows the airbag to deploy effectively and cushion your body during a collision, minimizing the risk of injury. Additionally, maintaining a proper distance from the steering wheel ensures that the airbag can inflate fully without causing harm. Always ensure that passengers are also buckled up to maximize safety for everyone in the vehicle.
Not sure exactly what you are asking. If you are referring to a stovepipe, that is a type of malfunction where the spent case does not fully eject from the pistol and gets stuck in an upright position in the ejection port.
When doing a seated shoulder press, sit upright with your back supported, feet flat on the floor, and core engaged. Hold the weights at shoulder level, palms facing forward. Press the weights overhead, fully extending your arms without locking your elbows. Lower the weights back to shoulder level and repeat.
The position of the forearm magnum on the skull of Australopithecus africanus indicated to Raymond Dart that the spinal cord entered the skull from below, similar to humans, suggesting they walked upright. This helped provide evidence for the theory that Australopithecus was a bipedal hominin.
Yes. If a patient with syncope is mid-incident and is prevented from achieving a fully supine position, global cerebral hypoperfusion is extended, leading to an anoxic convulsion.
For the Yamaha TTR90, the fuel and air mixture screw should typically be set at around 1.5 to 2 turns out from the fully seated position. This setting can vary slightly depending on altitude and other conditions, so it's advisable to start at this range and adjust as needed for optimal engine performance. Always ensure the engine is warm and running smoothly when making adjustments.
To properly adjust the seat on an upright bike for optimal comfort and performance, follow these steps: Adjust the seat height so that your legs are almost fully extended at the bottom of the pedal stroke. Position the seat horizontally so that your knees are directly above the pedals when the pedals are at the 3 o'clock and 9 o'clock positions. Adjust the seat angle to a comfortable position that allows you to maintain a neutral spine alignment. Experiment with small adjustments to find the most comfortable and efficient position for your body.
occlusion
Several possibilities: The brake pedal is stuck slightly and not returning to a fully upright position. (most likely) An electronic controller is malfunctioning. Short in the wires somewhere. (not as likely)
A round piece of pipe, that fits over the crank snout, and a big hammer.
Yes. A patient should be fully informed of their medical condition and all treatment should be explained.
JET,MAIN #230137-14143-46-A1NEEDLE SET #2XJ-1490J-00-00At idle needle needs to be fully seated. The needle set consist of needle, clip, slide, retainer screw.