CTS test may mean a test for carpal tunnel syndrome. The classic examples are the Phalen test and the Tinel test.
On red money (1 cts, 2 cts and 5 cts) there is a picture of Marianne who is the symbol of liberty in France. On yellow money (10 cts, 20 cts and 50 cts) there is a picture of 'La semeuse' (= the sower lady) who is another symbol of liberty.
code 15 coolant temp sensor low temp indicated change cts sensor or test with multi meter
They used to stand for Catera Touring Sedan when the CTS first replaced the Catera. Now it doesnt mean anything in particular. Just a model line in Cadillac that is a Sedan, Coupe, and Sport Wagon.
A compression test is a good place to start.
CTS=C series Touring Sedan DTS=D series Touring Sedan
The C stands for "C class". The TS stands for Touring Sedan. This is very close to right. The CTS is actually just a continuation of the Cadillac Catera, although the CTS is not made in Germany. The "C" stands for Catera, as in Catera Touring Sedan. You may also notice that the Deville and Seville have been replaced by the Deville touring sedan (DTS) and the Seville touring sedan (STS). "CTS" stands for "C-Series Touring Sedan." CTS-V is the sports model and a bit more expensive. The abbreviation has nothing to do with the Catera.
As of July 2014, the market cap for CTS Corporation (CTS) is $607,428,876.42.
you know its behind that thing. you know what i mean.
Your anti theft alarm is disarmed
The symbol for CTS Corporation in the NYSE is: CTS.
"Treize euros et seize centimes /or/ treize euros et seize cts" (cts being the abbreviation for cents)When writing figures in the right side box, change the period for a comma: French people would write "13,16 €" and not "13.16 €"
To change the current transformers (CTs) in an air circuit breaker, first ensure that the circuit breaker is de-energized and properly isolated from the electrical supply for safety. Remove the cover of the circuit breaker, then carefully disconnect the wiring associated with the existing CTs. Next, detach the old CTs from their mounting, install the new CTs in their place, and reconnect the wiring. Finally, close the circuit breaker and perform a functional test to verify proper operation.