To set a Mudder watch to military time, first, locate the mode button on your watch. Press and hold the mode button until the time settings appear. Use the adjust button to change the time format from standard to military (24-hour) time, then save the settings by pressing the mode button again. Make sure to double-check the hour display to ensure it's set correctly.
To set an Armitron WR165 digital watch to military time, first press the "Mode" button until you reach the time-setting mode. Then, hold down the "Adjust" button until the hour starts to blink. Use the "Start/Stop" button to toggle between 12-hour and 24-hour formats; select 24-hour for military time. Finally, adjust the hours and minutes as needed, then press "Adjust" again to save the settings.
To change military time to regular time on a Timex 1400 watch, first, press the "Mode" button until you reach the time setting mode. Then, hold the "Set" button until the hour begins to flash. Use the "Forward" or "Reverse" buttons to adjust the hour to the desired setting, ensuring that it reflects the regular 12-hour format (AM/PM). Finally, press the "Set" button again to confirm the changes.
To set a West Bend Timer to military time, first, ensure the timer is in the correct mode by pressing the "Mode" button until you reach the time setting function. Then, use the "+" or "–" buttons to adjust the hour and minute, ensuring you input the time in a 24-hour format. Once the desired time is set, press the "Start" or "Set" button to confirm your selection. Finally, check the display to ensure it reflects the military time correctly.
To convert military time to regular time, first, identify if the military time is greater than 1200. If it is, subtract 1200 from the military time to get the corresponding regular time in the PM. For times less than 1200, simply use the military time as is for AM, except for 0000 which is 12:00 AM. Lastly, add "AM" or "PM" as appropriate to complete the conversion.
To change your Timex Indiglo digital watch from military time to standard time, you will need to access the watch's settings menu. Typically, this involves pressing and holding a specific button, such as the mode or set button, until the display starts blinking. Then, you can cycle through the available time formats using the appropriate buttons until you reach the standard 12-hour format. Finally, confirm your selection by pressing the appropriate button to save the changes. Refer to your watch's user manual for specific instructions tailored to your model.
how do I set time on a wal mart aw watch
How do you set the time & date on diesel watch DZ-7069
I HAVE A ATHLETIC WATCH FROM WALMART BIG FACE AW150 MODEL THAT WENT INTO MILITARY TIME. I HAVE THE INSTRUCTIONS BUT IT SAYS NOTHING ABOUT SETTING MILITARY TIME. HOW DO I GET IT BACK TO NORMAL TIME When the hour is set the watch goes through two sets of 24 hour choices, one set for regular time, one for military time. After pressing the lower left button three times and the lower right button once you are setting the hour of the time. When an 'H' appears to the right of the time, these are the military hour choices. Keep pressing the upper right button until the 'H' disappears (an 'A' appears to indicated AM hours), then the hours depicted are regular time hours. When the correct hour appears press the lower right button.
digitel time set
To set the time on a Gucci wrist watch you simply pull the crown out to the middle position. You can then move the time clockwise or counter clockwise to set the correct time. Once you have the time set, push the crown back in to start the watch.
To change standard time to military time on an Athletic Works watch model ATHM 4801, press and hold the "Mode" button until the time display starts to blink. Use the "Adjust" button to toggle between the standard and military time formats. Once military time is selected, press the "Mode" button again to save the setting. Ensure the time is set correctly before exiting the setup mode.
howdo you set the time on a hotaru LED watch
To set an Armitron WR165 digital watch to military time, first press the "Mode" button until you reach the time-setting mode. Then, hold down the "Adjust" button until the hour starts to blink. Use the "Start/Stop" button to toggle between 12-hour and 24-hour formats; select 24-hour for military time. Finally, adjust the hours and minutes as needed, then press "Adjust" again to save the settings.
how do i set my active intent watch ?? tw2461 sr626sw/cr2016
Breitling watch info at link
depends on the watch.
To set the time on a Charles Raymond watch, locate the crown on the side of the watch. Pull the crown out to its second position and rotate it to adjust the time. Once the correct time is set, push the crown back in to its original position.