answersLogoWhite

0

Turbo shaft engines deliver mostly all of the power to a gear box built into the engine, a separate transmission takes that power to the rotar . Lots of big heavy gears

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is rotary all about?

it has two or three rotor's that spin generating power its the same rx7s and black hawk helicopters both have rotary engines. Its been proven that some rx7 rotary engines can push an upwards of 900 hp. Without any assistance from a turbo, or Nitrous Oxide Systems


Why a single phase motor is not self starting?

For a rotating part need two equal & opposite forces separated by a some distant acting on its edges of axis are needed. In a single phase motor the winding produces a single force on the rotor. In order to achieve a force couple on rotor two windings fed from a single phase source are split in to two forces with the help of a capacitor. With such an arrangement two rotating forces which are 90 electrical degrees apart are produced. Thus forming a force couple on the rotor.


How many pistons does a Wankel engine have?

Wankel Engines don't have pistons. They have rotors instead. The rotor is vaguely triangular, and turns in a cleverly shaped, oval chamber. The combustion volume is formed by the space enclosed between two of the tips of the rotor and the walls of the chamber. But just like piston Engines can have different numbers of pistons, wankel Engines can have different numbers of rotors.


What are the two different forces acts in opposite direction on the rotor of single phase induction motor?

An induction motor has an AC power source applied to the stator and an AC source applied to the rotor, through slip rings. The rotor spins a sub synchronous speed, which creates the phase shift between rotor AC and stator AC. This phase shift (known as slip) is what creates the torque.


What is the deffrence between a turbo and a supercharger?

A supercharger runs off the engines power directly. : A turbo has two fans one that takes power from the engines exhaust.


How many cylinders are in a Mazda RX-8?

The Mazda RX-8 is a rotary engine, it has no cylinders. The Mazda RX-8 has a single TWO-rotor engine. Cylinders are only for piston engines. The RX-8 is a 1.3 Liter Rotary. (No I4 or V6) Just Rotary.


Where reactive power is used which is released in another part of ac voltage cycle as you have reactive power is power that is stored in one part of the AC voltage wave and released in another?

single phase induction motor is really a two phase motor a capacitor to one of the phases stores the reactive power releasing it to the coil 90 degrees later setting up the rotating magnetic field that stores reactive power in the rotor (or the shorted windings of the rotor) releasing it as it turns


State two reasons why most vehicle engines are multi-cylinder.?

Most vehicle engines are multi-cylinder because they provide a smoother power delivery and reduce vibration compared to single-cylinder engines. Additionally, multi-cylinder engines allow for more power output without significantly increasing engine size, as they can generate more horsepower through the combined work of multiple cylinders. This enhances overall performance and efficiency in vehicles.


What is Mazda rx8 firing order?

The Mazda RX-8 features a unique rotary engine design, and its firing order is not defined in the same way as traditional piston engines. However, for the 1.3-liter Wankel rotary engine, the rotor fires sequentially in a pattern that effectively provides a smooth power delivery. The engine completes a full cycle with each rotor making three power strokes for every two revolutions of the crankshaft.


Why do most very large engines operate on a two-stroke cycle?

very large is the keyword here. for a very large engines that runs large machines, we need high power engines. two-strike cycle engines produce more power than 4-stroke cycle engines. that's why they are used. as they produce more pollution than 4-strokes, they must be limited to small spaced engines machines or large machines that required very high power.


Is there a stock 1999 Saturn SC2 Long Block Engine?

The SC and SL used the same type engines. There were two available; the single cam was in the SL1 and SC1. The dual cam was in the Sl2 and SC2. All of the dual cam engines are interchangeable. All of the single cam engines were interchangeable.


Why do most very large engines operate on two stroke cycle?

very large is the keyword here. for a very large engines that runs large machines, we need high power engines. two-strike cycle engines produce more power than 4-stroke cycle engines. that's why they are used. as they produce more pollution than 4-strokes, they must be limited to small spaced engines machines or large machines that required very high power.