0
What else can I help you with?
How thick is a 2 x 6?
depends on the units. is it a 2 x 6 piece of plywood? or is it just a piece of paper? If it is wood then its 2" or feet thick. If its like a 3D object then i couldn't tell you cause i don't know the other dimension.
What is the dimension of a precut wood stud?
A precut/milled wood stud is 2 inches by 4 inches before milling. When milled 1/4 of an inch is removed from all linear surfaces making it a 1 and 1/2 by 3 and 1/2 inch piece of lumber.
Jack cut a piece of wood that was 8 feet long into two pieces one piece is three times as long as the other how long in the shorter piece of wood?
Let x be the length measure of the shortest piece of wood, and 3x the length measure of the other piece of wood. So we have: x + 3x = 8 4x = 8 divide by 4 to both sides; x = 2 The length measure of the shortest piece of wood is 2.
How wide is a 2 X 4 piece of wood?
4
What do you call piece of wood that separates 2 rooms?
thresh-hold
What is the actual dimension of a 1 x 8 board?
Typically it would be 3/4 X 7-1/2.
What dimension of 2 by 2?
dimension 4
Name 2 ways you could increase friction?
you can get old piece of wood
What is a man made frame structure?
A frame with a 2 by 4 piece of wood
What are the actual measurements of a 2x6?
A nominal 2x6 lumber piece typically measures 2 inches by 6 inches in name, but its actual dimensions are usually about 1.5 inches by 5.5 inches. This reduction in size occurs due to the drying and planing processes that prepare the wood for use. The dimensions can slightly vary based on the type of wood and the specific milling processes used.
How much does a 2x8x10 piece of wood weigh?
A piece of wood that is 2 inches thick, 8 inches wide, and 10 feet long will weigh approximately 65-70 pounds, depending on the type of wood and its moisture content.
What are the actual dimensions of a 2 by 4 piece of lumber?
A 2 by 4 piece of lumber actually measures 1.5 inches in thickness and 3.5 inches in width.
